HP DESKJET-2632 user manual

If your HP printer is not printing, follow these steps:
1. Check your Printer: Ensure your HP printer has enough paper, ink or toner, and it doesn't have any error or warning lights. If there are warning lights, refer to your printer's manual or give HP a call.
2. Check your Printer Queue: Go to your Control Panel, then Devices and Printers. Right click on the HP printer and select "See what's printing". You can see if there are any old documents in the queue.
3. Check Connection: Ensure your printer is properly connected to your computer, whether it's a USB cable or wireless connection.
4. Update HP Printer Drivers: Go to the HP website, and under "Support and Drivers", type in your printer model, and download and install the latest drivers.
5. Use HP Print and Scan Doctor: Download and run HP Print and Scan Doctor which can troubleshoot the printer for you.
6. Set your HP printer as Default: Under Devices and Printers, find your HP printer, right click on it, and set it as the default printer.
7. Restart your printer and computer: Sometimes a simple reboot can fix many problems.
If after all these steps, your HP printer is still not printing, it might be an internal problem with the printer itself.

Please note: Always handle electronic appliances with extreme care. If you do not feel comfortable performing these steps, contact HP customer support or a professional.

To connect your HP Deskjet 2632 printer to your Wi-Fi network, you can follow the instructions below:
1. Ensure that your printer is turned on and has paper loaded in the input tray.
. On your computer or mobile device, go to the Wi-Fi settings and make sure you are connected to the network you want to use with your printer.
3. Press and hold the Wireless button (located on the printer control panel, usually with a wireless icon) for a few seconds until the Wireless light starts blinking.
4. Within two minutes of pressing the Wireless button, go to the Wi-Fi settings on your computer or mobile device and look for the printer name in the available networks list.
5. Select the printer name that matches your printer model (e.g., HP Deskjet 2632) from the network list.
6. If prompted, enter the Wi-Fi network password (WPA/WPA2 passphrase) for your network and select the Connect option.
7. The Wireless light on your printer should stop blinking and remain solid, indicating that the printer is now connected to your Wi-Fi network.
Once connected, you can test the connection by printing a test page or document wirelessly from your computer or mobile device.

There could be several reasons why your HP DeskJet 2632 is not printing. Here are some potential troubleshooting steps you can try:
1. Check ink levels: Make sure that the ink cartridges in your printer have enough ink. If they are low or empty, replace them with new cartridges.
2. Paper jams: Paper jams can prevent your printer from printing. Open the printer cover and check for any paper jams. If you find any, carefully remove the jammed paper and try printing again.
3. Connection issues: Ensure that your printer is properly connected to your computer or network. If using a USB connection, try disconnecting and reconnecting the cable. If using a wireless connection, make sure that both your printer and computer are connected to the same network.
4. Restart printer and computer: Sometimes, simply restarting your printer and computer can resolve temporary issues. Turn off both devices, wait for a few seconds, and then turn them back on.
5. Update or reinstall printer drivers: Outdated or corrupted printer drivers can cause printing problems. Visit the official HP support website and download the latest drivers for your printer model. Install them on your computer and try printing again.
6. Check print queue: There may be a problem with the print queue. Open your printing queue and cancel any pending print jobs. Then, try printing a new document to see if it works.
7. Reset printer: Resetting your printer to its factory settings might help resolve any internal issues. Check your printer's manual or website for instructions on how to perform a reset.
If none of these steps resolve the issue, you may need to contact HP support for further assistance or consider professional repairs.