HP COLOR-LASERJET-PRO-MFP-M277DW user manual

Error code 55.1 on the HP Color-LaserJet-Pro-MFP-M277dw usually indicates a problem with the printer's scanner motor. This error is commonly caused by a malfunctioning scanner motor or a power supply issue. Here are some steps you can try to resolve the error:
1. Restart the printer: Turn off the printer, unplug it from the power source, wait for a few minutes, and then plug it back in.
2. Check scanner connection: Make sure the scanner cables are securely connected to the printer. Disconnect and reconnect the cables if necessary.
3. Reset the printer: Press and hold the power button to turn off the printer. Wait for about 30 seconds, then press the power button again to turn it on.
4. Update printer firmware: Visit the HP website and check if there are any firmware updates available for your printer model. If there are, download and install them according to the provided instructions.
5. Contact HP Support: If the error persists after trying the above steps, it is recommended to contact HP support or a qualified technician for further assistance. They will be able to diagnose the specific issue and provide a solution or recommend repairs if necessary.

To reset the HP Color LaserJet Pro MFP M277dw printer, you can follow these steps:
1. Power on the printer, if it's not already turned on.
2. Locate the "Back" button on the front panel of the printer. It is usually represented by a blue arrow pointing to the left.
3. Press and hold the "Back" button for about 10-15 seconds until the printer's display screen shows the "Reset Menu" or "Restore Factory Settings" option.
4. Using the touch screen or the navigation buttons around it, navigate to the "Restore Factory Settings" option and press it to select.
5. The printer will now prompt you to confirm the reset action. Select "Yes" or "OK" to proceed with the reset.
6. The printer will begin the reset process, which may take a few minutes. During this time, the printer will shut down and restart.
7. Once the reset is complete, the printer will display the initial setup wizard or the main menu, indicating that the reset was successful.
Please note that resetting the printer will erase all the previous settings and configurations, so you may need to reconfigure it as per your requirements after the reset.

To clear the memory on your HP LaserJet Pro MFP M277dw, you can follow these steps:
1. Turn off your printer.
. Disconnect the power cable from the back of the printer.
3. Wait for at least 30 seconds.
4. Plug in the power cable back into the printer.
5. Turn on the printer.
6. Wait for the printer to initialize and start up.
7. The memory should now be cleared.
This process effectively clears the memory of the printer and can help resolve any issues related to memory or print queue.

Yes, the HP Color LaserJet MFP M277dw can print double-sided or duplex printing.