HP COLOR-LASERJET-PRO-M452DN user manual

To change the default tray on your HP Color LaserJet Pro M452dn printer, you can follow these steps:
1. Turn on your printer and ensure it is connected to the computer.
. Open the Control Panel on your computer.
3. Click on "Devices and Printers" or "Printers & Scanners".
4. Locate and right-click on your HP Color LaserJet Pro M452dn printer.
5. Select "Printing Preferences" or "Printer Properties" from the context menu.
6. In the Printing Preferences or Printer Properties window, navigate to the "Paper/Quality" or "Paper" tab.
7. Look for an option called "Default Tray" or "Paper Source" and click on it.
8. Choose the desired tray from the available options.
9. Finally, click on "Apply" or "OK" to save the changes.
Now, whenever you print a document, the selected tray will be used as the default.

To set up your HP Color LaserJet Pro M454dn, follow the steps below:
1. Unpack the printer: Remove all the packaging materials from the printer and any protective tape or covers.
2. Connect the power cord: Plug one end of the power cord into the rear of the printer and the other end into a power outlet. Ensure the printer is turned off before connecting the power cord.
3. Insert the toner cartridges: Open the front cover of the printer and gently pull out the toner cartridge drawer. Remove the orange protective cover from the toner cartridges and insert them into their respective color-coded slots. Push the drawer back into the printer until it clicks into place.
4. Load paper: Open the paper input tray located at the bottom of the printer. Adjust the paper guides to match the width of the paper you are using. Place a stack of paper into the tray and adjust the guides tightly against the paper. Close the input tray.
5. Connect to the network (optional): If you want to connect your printer to a network for sharing, use an Ethernet cable to connect the printer to your router or switch. If you prefer a USB connection, you can connect the printer directly to your computer using a USB cable.
6. Power on the printer: Press the power button located on the front panel of the printer to turn it on. The printer will initialize and warm up.
7. Install the printer software: Visit the HP support website and download the latest driver and software package for your operating system. Run the downloaded file and follow the on-screen instructions to install the driver.
8. Configure printer settings: Once the software installation is complete, launch the printer software on your computer. You may need to go through the initial setup process and configure any desired settings, such as paper size, print quality, or network settings.
9. Print a test page: After setting up your printer, it's recommended to print a test page to ensure everything is functioning correctly. Open a document or image on your computer, select "Print," and choose the Color LaserJet Pro M454dn as the target printer.
Your HP Color LaserJet Pro M454dn is now set up and ready to use.

To set up color printing on your HP LaserJet Pro M452dn, follow these steps:
1. Connect the printer: Make sure the printer is properly connected to your computer or network. Use the included USB cable or connect it to your network via Ethernet.
2. Power on the printer: Plug in the power cable and turn on the printer.
3. Install the printer software: Go to the HP Support website and search for the HP LaserJet Pro M452dn printer model. Download and install the latest printer software and drivers for your operating system.
4. Open Printer Properties: Open the Control Panel on your computer and navigate to the "Devices and Printers" or "Printers and Scanners" section. Locate your LaserJet Pro M452dn printer icon.
5. Access Printer Preferences: Right-click on the printer icon and select "Printer Properties" or "Printing Preferences" from the context menu.
6. Set color options: Within the Printer Properties or Printing Preferences window, go to the "Color" or "Printing Shortcut" tab. Here you can choose various color options such as Color, Grayscale, or Black Only, depending on your preferences.
7. Apply changes and print: Once you have chosen your desired color settings, click on "Apply" or "OK" to save the changes. You can now start printing in color using your LaserJet Pro M452dn.
Note: Ensure that your paper type and quality settings are also suitable for color printing. Adjust these settings in the Printer Properties or Printing Preferences window if necessary.