Hisense 43R61G user manual

It is not possible for me to determine the current status of the red light on your Hisense TV model 43R61G without more information. Typically, the red light on a TV might be an indicator of the device being in standby mode or indicating that the TV is powered off. It would be best to consult the user manual of your specific TV model to understand the meaning of the red light.

Yes, you can use your Hisense TV without a remote. Most Hisense TVs have control buttons located on the side or bottom panel of the TV itself. These buttons allow you to power on/off the TV, control the volume, change channels, and navigate through the menu options. However, some advanced features or settings may only be accessible through the remote control.

The red light on your Hisense TV remote indicates that the remote control is emitting an infrared (IR) signal. This happens when you press a button on the remote. The red light is not visible to the naked eye but is detected by the IR sensor on the TV or other devices, which then interprets the signal and performs the corresponding action.

To get the HDMI output working on your Hisense TV, follow these steps:
1. Connect the HDMI cable: Ensure that one end of the HDMI cable is connected to the HDMI output port on your device (such as a set-top box, Blu-ray player, game console, or laptop), and the other end is connected to one of the HDMI input ports on your Hisense TV. Make sure to remember which HDMI input port you used.
2. Turn on your Hisense TV: Switch on your TV using the power button on the remote control or the TV itself.
3. Change the input source: Press the "Input" or "Source" button on your Hisense remote control. This will open a menu displaying various input sources.
4. Select HDMI input: Using the arrow buttons on your remote control, navigate to the HDMI input source you connected the cable to in step 1. Once highlighted, press the "OK" or "Enter" button to select it.
5. Check for the HDMI signal: If the HDMI source device is powered on and working correctly, you should see its content displayed on your Hisense TV screen.
If you encounter any issues or have trouble with the HDMI output, ensure that the HDMI cables are securely connected and in good condition. You can also try using a different HDMI cable or testing the HDMI source device on another TV to isolate the problem.