Hilti PR-30-HVS-A12 user manual

To pair your Hilti PRA 30 with your Hilti PR-30-HVS-A12, follow these steps:
1. Turn on your Hilti PR-30-HVS-A12 by pressing and holding the power button for a few seconds until the device powers on.
2. Press the function button on the Hilti PR-30-HVS-A12 until you reach the "Connect" option in the menu.
3. Once you see "Connect" on the display, press the function button to select it.
4. The Hilti PR-30-HVS-A12 will now enter pairing mode. On the PRA 30, press and hold the power button until the Bluetooth symbol starts blinking rapidly, indicating that it is in pairing mode.
5. The Hilti PR-30-HVS-A12 will search for nearby Bluetooth devices. It should detect the PRA 30 and display it on the screen.
6. On the Hilti PR-30-HVS-A12, use the function buttons to navigate to the PRA 30 in the list of detected devices. Press the function button to select it.
7. A pairing code may be required to connect the devices. If prompted, enter the pairing code displayed on the Hilti PR-30-HVS-A12 into the PRA 30.
8. Once the pairing is successful, the Hilti PR-30-HVS-A12 will display a confirmation message, and the PRA 30 will stop blinking and remain connected.
You have now successfully paired your Hilti PRA 30 with your Hilti PR-30-HVS-A12. The devices will now be able to communicate and share information wirelessly.

If your Hilti PR-30-HVS-A12 laser is blinking, it typically indicates a warning or error condition. There can be several reasons for this issue, including:
1. Low battery: If the battery charge is low, the laser may blink to indicate the need for battery replacement or charging.
2. Out-of-level condition: The laser may blink if it is not level or if it detects an error in the leveling mechanism. Make sure the unit is placed on a stable surface and try adjusting the leveling screws.
3. Temperature warning: Extreme temperature conditions can cause the laser to blink to indicate that it may not be operating within optimal temperature limits. Bring the laser to a more suitable environment and allow it to acclimate before using it.
4. Error in operation: If there is a malfunction or error in the internal components or software, the laser may blink to signal a problem. In such cases, it may be necessary to contact Hilti customer support for troubleshooting or repair assistance.
It is important to refer to the user manual specific to your model for troubleshooting steps and understanding the exact meaning of different blinking patterns.