Harman-Kardon CITATION-ONE user manual

No, you cannot directly connect the Harman Kardon Citation One to a TV. The Citation One is mainly designed for audio streaming and does not possess an auxiliary input or HDMI input which are typically used to connect to a TV.
However, if your TV has Bluetooth output capabilities, you may be able to connect the Citation One to your TV using Bluetooth. Another possible way is using a device like a Google Chromecast Audio or Chromecast that connects to your TV, then casts the audio to your Citation One. Please refer to the device's manual for more details.

To adjust the bass on the Harman Kardon Citation One, you can follow these steps:
1. Start by ensuring that the speaker is powered on and connected to your device (phone, tablet, or computer) via Bluetooth or Wi-Fi.
2. Once connected, open the music or audio app on your device and play a song or audio clip.
3. On your device, locate the volume control or equalizer settings. These can typically be found within the audio playback settings or in the music player app itself.
4. Within the equalizer settings, find the bass adjustment section. The name of this option may vary based on the app or device you are using.
5. Adjust the bass level according to your preference. You can typically increase or decrease the bass using a slider or by selecting various presets.
6. Once you have adjusted the bass level, you should immediately notice the changes in the audio output from the Harman Kardon Citation One speaker.
Note: Some music apps or devices may not have built-in equalizer settings. In such cases, you might need to rely on the speaker's own bass adjustments. The Citation One doesn't have physical bass control buttons, so you would need to use an external equalizer or adjust the settings within the music app or device you are using to control the bass output.

To connect your Harman Kardon Citation One speaker to Bluetooth, please follow these steps:
1. Turn on your Citation One speaker by pressing the power button located on the rear of the device.
. The LED indicator on the front of the speaker should start blinking, indicating it is in pairing mode.
3. On your Bluetooth-enabled device (e.g., smartphone, tablet, or computer), go to the settings menu and enable Bluetooth.
4. The device will start scanning for available Bluetooth devices. Look for "Harman Kardon Citation One" in the list of devices and select it.
5. If prompted, enter the PIN code "0000" or "1234" to pair the devices.
6. Once connected, the LED indicator on the front of the Citation One will stop blinking and remain lit.
7. You can now play audio from your connected device through the Citation One speaker.
Note: Make sure your Bluetooth device is within range and that no other devices are already connected to the speaker. If you encounter any issues, you can also try resetting the speaker by pressing and holding the Bluetooth/Wi-Fi button for about 10 seconds until the LED indicator blinks white rapidly.

There could be several reasons why your HK Citation One is not connecting. Here are a few troubleshooting steps you can try:
1. Check the power source: Ensure that the speaker is plugged into a working power outlet and turned on.
2. Check the Wi-Fi connection: Ensure that your Wi-Fi network is working properly and that the speaker is in range of the Wi-Fi signal. You can also try restarting your router.
3. Reset the speaker: Try resetting your HK Citation One by pressing and holding the Bluetooth button for around 10 seconds until the speaker turns off and then back on again.
4. Update the firmware: Check if there are any available firmware updates for your speaker. You can do this through the Harman-Kardon app or by visiting the official Harman-Kardon website.
5. Forget and reconnect to Wi-Fi network: In your device settings, try forgetting the previously connected Wi-Fi network and then reconnecting to it.
6. Check for interference: Ensure that there are no other devices causing interference with your Wi-Fi signal, such as other electronics or appliances.
If none of these steps work, it may be helpful to contact Harman-Kardon customer support for further assistance.