Harman-Kardon CITATION-ONE-MK2 user manual

To connect your Harman Kardon Citation One MK2 to your TV, you can follow these steps:
1. Check the available audio output options on your TV. Typically, modern TVs have either an HDMI ARC (Audio Return Channel) or an optical (Toslink) audio output.
2. If your TV has an HDMI ARC port, use an HDMI cable to connect the TV's HDMI ARC port to the HDMI ARC input on your Harman Kardon Citation One MK2. Make sure to use a compatible HDMI cable.
3. If your TV has an optical audio output, use an optical cable (Toslink) to connect the TV's optical audio output to the optical input on your Harman Kardon Citation One MK2. Ensure that the cable is securely connected.
4. Once connected, turn on your TV and Harman Kardon Citation One MK2.
5. On your Harman Kardon Citation, press the "Source" or "Input" button on the control panel or remote to select the appropriate input source for the TV connection (e.g., "HDMI ARC" or "Optical").
6. Adjust the volume on both your Harman Kardon Citation and your TV to a desired level. You can use either the Harman Kardon Citation or TV remote to control the volume.
7. Now, when you play audio or content on your TV, the sound should be played through your Harman Kardon Citation One MK2.
It's important to mention that the specific steps might vary depending on your TV model and the available audio output options. Refer to your TV's user manual for more detailed instructions if needed.

To adjust the bass on the Harman Kardon Citation One, you can follow these steps:
1. Start by ensuring that the speaker is powered on and connected to your device (phone, tablet, or computer) via Bluetooth or Wi-Fi.
2. Once connected, open the music or audio app on your device and play a song or audio clip.
3. On your device, locate the volume control or equalizer settings. These can typically be found within the audio playback settings or in the music player app itself.
4. Within the equalizer settings, find the bass adjustment section. The name of this option may vary based on the app or device you are using.
5. Adjust the bass level according to your preference. You can typically increase or decrease the bass using a slider or by selecting various presets.
6. Once you have adjusted the bass level, you should immediately notice the changes in the audio output from the Harman Kardon Citation One speaker.
Note: Some music apps or devices may not have built-in equalizer settings. In such cases, you might need to rely on the speaker's own bass adjustments. The Citation One doesn't have physical bass control buttons, so you would need to use an external equalizer or adjust the settings within the music app or device you are using to control the bass output.

To reset the Harman Kardon Citation One mk2, you can follow the steps below:
1. Ensure that the speaker is plugged into a power source.
. Locate the Bluetooth and volume buttons on the top of the speaker.
3. Press and hold both the Bluetooth and volume up buttons simultaneously for 5-10 seconds.
4. The speaker will power off and then power back on, indicating that it has been reset.
5. Once the reset is complete, you can set up the speaker again by following the initial setup instructions.
Please note that resetting the speaker will erase any customized settings and disconnect it from any previously paired Bluetooth devices.