Graco MODES-ADVENTURE user manual

Graco recommends replacing car seats after 7-10 years from the date of manufacture. The expiration date can usually be found on a sticker located on the back or bottom of the car seat. It is important to follow the manufacturer's guidelines and not use a car seat beyond its recommended expiration date, as the materials may degrade over time and may not provide the necessary safety protection.

To loosen the straps on a Graco Modes-Adventure car seat when it is forward-facing, you can follow these steps:
1. Locate the metal harness release button usually located on the seat's back or on the sides near the bottom. It may be round or rectangular in shape.
2. Press and hold the metal harness release button while simultaneously pulling the shoulder straps forward toward the front of the car seat. This action will release the tension and loosen the straps.
3. Pull the straps out through the harness slots to create adequate slack, ensuring they are not twisted.
4. Adjust the straps to the desired length by pulling on them evenly from the front of the car seat.
5. Once you have set the straps to the correct length, secure the metal harness release button to lock them in place.
Always refer to the car seat's instruction manual for specific details and guidelines on adjusting the straps, as methods can vary slightly between different Graco car seat models.