GoPro HD-HERO user manual

To determine the model of your GoPro, you can follow these steps:
1. Look for the model number on the camera itself: On most GoPro models, the model number is printed on the front of the camera near the lens or on the bottom.
2. Check the packaging or user manual: If you still have the original packaging or the user manual of your GoPro, you can find the model name or number printed on the box or mentioned within the manual.
3. Connect your GoPro to the GoPro App: Download and install the GoPro app on your smartphone or tablet. Connect your GoPro to the app via Wi-Fi or Bluetooth. Once connected, open the app, and it should display the model of your camera under the device's settings.
4. Visit the GoPro website: Go to the official GoPro website (gopro.com) and navigate to the Support section. From there, you can enter the serial number of your GoPro (usually found on the camera or packaging) into their lookup tool to identify the model.
By using one or more of these methods, you should be able to determine the model of your GoPro.

The GoPro Hero cameras typically have a number of voice commands that allow users to control various functions of the camera without having to physically touch it. Some common GoPro voice commands include:
1. "GoPro, start recording" - Starts video recording.
. "GoPro, stop recording" - Stops video recording.
3. "GoPro, take a photo" - Captures a photo.
4. "GoPro, shoot burst" - Captures a burst of photos.
5. "GoPro, start time-lapse" - Initiates time-lapse mode.
6. "GoPro, stop time-lapse" - Stops time-lapse mode.
7. "GoPro, turn on Wi-Fi" - Enables Wi-Fi connectivity.
8. "GoPro, turn off Wi-Fi" - Disables Wi-Fi connectivity.
9. "GoPro, start capture mode" - Switches to a specific video/photo mode.
10. "GoPro, highlight" - Adds a highlight tag during recording.
11. "GoPro, change mode" - Switches between different camera modes.
12. "GoPro, preferences" - Opens the preferences menu.
13. "GoPro, turn off" - Powers off the camera.
Please note that the available commands may vary depending on the model of the GoPro camera and the firmware version installed.