GE PROFILE-PTD7000SNSS user manual

The steam clean function on your GE Oven usually turns off automatically once the cycle is completed. However, if you need to stop it manually, follow these steps:
1. Press the "Cancel/Off" button twice on the oven's control panel.
. Open the oven door to allow any steam to escape.
3. Wait for the oven to cool down before attempting to clean up any remaining water or debris.
Always refer to your user manual for specific instructions regarding your particular model. If you've misplaced your manual, you can often find digital versions online at the manufacturer's website.

To lock the door of your GE oven for self-cleaning, follow these steps:
1. Make sure the oven is empty and remove any racks or accessories.
2. Close the oven door completely.
3. Locate the oven control panel on the front of the oven.
4. Look for the "Self Clean" or "Clean" button on the control panel. Press it once.
5. Enter the desired self-cleaning duration using the oven's numeric keypad (usually displayed as hours). The default duration is usually 3 hours, but you can adjust it according to your needs.
6. Press the "Start" or "OK" button to begin the self-cleaning cycle. The door will automatically lock once the cycle starts. You may hear a mechanical latch engaging to secure the door.
7. The oven will now heat up and begin the self-cleaning process. During this time, the door will remain locked for safety reasons. Avoid trying to open the door while the cycle is in progress.
8. Once the self-cleaning cycle is complete, the oven will cool down, and the door will unlock automatically. This process usually takes a few hours.
It's important to note that self-cleaning ovens can generate high temperatures to burn off food residues, so keep the surrounding area well-ventilated and clear of any flammable materials. Additionally, avoid touching the oven's exterior while it's in self-cleaning mode, as it can become hot.