Garmin STRIKER-PLUS-4 user manual

Yes, the Garmin Striker 4 does have basic maps. It is equipped with Garmin's built-in high-sensitivity GPS, which allows you to mark waypoints, create routes, and view your boat's speed and location on the built-in display. However, it should be noted that the maps on the Garmin Striker 4 are not detailed navigational charts like those found on higher-end fish finders or chartplotters.

To update your Garmin STRIKER Plus 4 device, you can follow these steps:
1. Connect your STRIKER Plus 4 to your computer using a USB cable.
. Visit the official Garmin website (https://www.garmin.com/en-US/) and navigate to the Support section.
3. Search for the "Garmin Express" software and download it to your computer.
4. Install Garmin Express and launch the program.
5. Follow the on-screen prompts to set up your device and connect it with Garmin Express.
6. Once your device is connected, Garmin Express will automatically detect any available updates for your STRIKER Plus 4.
7. Click on the "Install All" button to install the updates. Ensure that your device remains connected and powered on during the update process.
8. Wait for the update to complete. This may take a few minutes.
9. Once the update is finished, safely disconnect your STRIKER Plus 4 from the computer.
10. Your Garmin STRIKER Plus 4 is now up to date and ready for use.
Please note that you can also use the Garmin Connect app on your smartphone to update your device if it supports that feature.

To add maps to your Garmin Striker 4, you will need to download and install the Garmin Quickdraw Contours mapping software. Follow these steps:
1. Go to the Garmin website and search for "Garmin Quickdraw Contours" or visit the following link: https://www.garmin.com/quickdraw/
2. Download the Quickdraw Contours software and install it on your computer.
3. Launch the Quickdraw Contours software and create a free Garmin account if you don't already have one.
4. Connect your Garmin Striker 4 to your computer using a compatible data cable.
5. In the Quickdraw Contours software, click on "Create Map" and choose the area you want to map. You can also choose to import existing maps.
6. Start recording sonar data by turning on your Garmin Striker 4 and going to the Sonar menu. Ensure that your sonar settings are configured properly.
7. While on the water, start recording sonar data for the desired area you want to map. The Striker 4 will save the sonar data onto its memory.
8. Once you finish recording the sonar data, connect your Garmin Striker 4 back to your computer using the data cable.
9. In the Quickdraw Contours software, click on "Exit Device" and select your Garmin Striker 4 from the list of compatible devices.
10. The software will then transfer the recorded sonar data from the device to your computer.
11. Once the data transfer is complete, you can view and edit the map data in the Quickdraw Contours software.
12. Finally, connect your Garmin Striker 4 to your computer again and click on "Sync Maps" in the Quickdraw Contours software to transfer the maps back to your device.
Now, the additional maps should be available on your Garmin Striker 4 when you use it on the water.