Garmin ETREX-32X user manual

Before you can start using your Garmin eTrex 32x, it should be properly set up first. Here are general steps on how to do it:
1. **Put Batteries:** Open the back cover and put in two AA batteries, following the proper polarity indicated inside.
2. **Turn On:** Hold down the power button until you hear a sound or see the unit light up.
3. **Language Setup:** After turning on, pick your desired language.
4. **Satellite Lock:** Go outside and wait for the device to lock onto satellite signals. This might take a few minutes especially if you're using the device for the first time.
5. **Date and Time:** You may also need to set the date and time, following the prompts.
6. **GPS Setup:** You will next go through a GPS calibration and barometric calibration. Follow the steps provided, which usually involves moving the device in a specific way.
7. **Profile Setup:** The device will guide you to set up the profile.
8. **Introduction to Controls:** The Garmin eTrex 32x will now introduce you to its controls and what each one does.
9. **System Settings:** You can now personalize the device by going into Setup > System and adjust settings as per your preference.
In the system settings, you can customize display settings, tones, map settings, routing options, time settings, units of measurement and so on.
10. **Satellite Page:** Scroll to the satellite page and confirm your device is locking onto satellite signals.
The device is now ready for use. You can move around with it and it should track your movements. If you need further adjustments, you can always go back to the system settings and adjust as per your preference.

1. Turn on your Garmin eTrex by pressing and holding the Power button.
2. From the main menu, select the "Tracks" or "Track Manager" option, depending on your device’s GUI.
3. In the Tracks menu, choose the "Setup Track Log" option which leads you to a new menu.
4. Choose the "Record Method" option. The record method determines how often the Garmin eTrex logs your location. You can choose auto, time, or distance. If you choose auto, the Garmin eTrex logs your location based on your movement. If you choose time, the Garmin eTrex logs your location at set time intervals. If you choose distance, the Garmin eTrex logs your location every time you move a specified distance.
5. Adjust the interval or distance settings to suit your requirements if necessary.
6. Set the "Record" option to on. This enables the Garmin eTrex to start logging your location.
7. Press the back button until you return to the main menu.
8. Use your Garmin eTrex as you move around, whether you're hiking, biking, or driving. The device logs your route.
9. When you're finished, you can view the route by selecting "Saved Tracks" from the Tracks menu.
10. Press the "View Map" button to see the route on the map. You can use the zoom buttons to zoom in and out, and the arrow buttons to move around the map.
Note: This process works for most Garmin eTrex models but may vary slightly depending on the specific model.

Yes, the Garmin eTrex 32x comes with preloaded TopoActive maps for the United States and Australia. These maps provide detailed information about trails, elevations, water bodies, and other features. Additionally, the device also supports additional mapping options, such as BirdsEye Satellite Imagery, which can be purchased separately.