Garmin EDGE-810 user manual

To reset your Garmin Edge 810, follow these steps:
1. Turn off your device by pressing and holding the power button.
. While holding the power button, simultaneously press and hold the lap/reset button located on the front of the device.
3. Keep both buttons pressed until the screen turns on and the device vibrates, indicating that the reset process has started.
4. Release the buttons and wait for the device to complete the reset. This usually takes a few seconds.
5. Once the reset is finished, the device will power on and prompt you to set it up again as if it were brand new.
Note: Resetting your Garmin Edge 810 will remove all your data and settings, so make sure to back up any important information before proceeding with the reset.

To connect your Garmin Edge-810 to your phone, follow these steps:
1. Make sure you have downloaded and installed the Garmin Connect Mobile app on your smartphone. It is available for both iOS and Android devices.
2. On your phone, enable Bluetooth, if it is not already enabled.
3. Power on your Garmin Edge-810 by pressing and holding the power button until the device turns on.
4. On the Garmin Edge-810, select the menu button, which looks like three horizontal lines.
5. Scroll down and select "Settings."
6. In the settings menu, scroll down and select "Bluetooth."
7. Enable Bluetooth on the Garmin Edge-810 by selecting "Enable."
8. Open the Garmin Connect Mobile app on your phone.
9. On the app, select the menu button or the three horizontal lines on the top-left corner of the screen.
10. Scroll down and select "Connect IQ Store." This is where you can find additional apps or extensions for your Garmin device.
11. In the Connect IQ Store, browse or search for the "Edge Remote" app.
12. Once you find the app, select it, and then select "Download."
13. After downloading, open the app on your phone.
14. On your Garmin Edge-810, go back to the settings menu, select "Bluetooth," and then select "Pair Smartphone."
15. Follow the prompts on the Edge-810 display to complete the pairing process.
16. Once the Garmin Edge-810 is paired successfully with your phone, they will connect automatically whenever both devices have Bluetooth enabled.
Now you can use the Garmin Connect Mobile app to sync your activities, upload routes or courses, and receive smart notifications directly on your Garmin Edge-810.

No, the Garmin Edge 810 does not have built-in WiFi capability. It uses Bluetooth to connect to your smartphone or computer for data transfers and updates.

To create a route on your Garmin Edge 810, you can follow these steps:
1. Turn on your Garmin Edge 810 and wait for it to acquire GPS satellite signals.
. Press the "Menu" button on the bottom right of the device.
3. Use the joystick or touch screen to navigate to the "Where To?" option and press enter.
4. Select "Courses" from the available options.
5. Press the "+" button to create a new course.
6. You can now choose how you want to create the route:
- "Ride" allows you to create a course by riding along the path you want to take. This method is useful when you are exploring new areas while riding.
- "Map" allows you to create a course by selecting various points on the map using the touch screen or joystick.
- "Location" allows you to create a course by specifying specific start and end points or by navigating to a previously saved location.
7. After selecting your preferred method, follow the on-screen instructions or reference the user manual for detailed steps specific to your selection.
8. Once you have finished creating the route, you can save it and give it a name.
9. The Garmin Edge 810 will now provide turn-by-turn directions for your created route.
Remember to ensure that your Garmin Edge 810 has the latest software updates and maps to ensure the best performance and accuracy while creating and following routes.