Frigidaire FGID2468UF user manual

The reasons for your Frigidaire dishwasher to shut off after a few minutes could be varied.
1. Power Supply: An improper power supply can cause the device to shut off soon after starting as the dishwasher need adequate power to run the program. Check to make sure the outlet is working properly and the power cord is not damaged.

. Water Supply: If your dishwasher is not getting the right water supply, it might turn off.
3. Door Latch: If the door latch isn't fully engaged, your dishwasher may start but shut off prematurely. Its sensors will detect that the door is open and therefore shut down.
4. Control Panel: Certain reasons related to the control panel may also cause problems, including a short circuit, or a need for a reset.
5. Overheating: Your dishwasher may be overheating and shutting down to protect itself. This could be due to a fault in the internal wiring or other components.
In any of these cases, if the problem persists it is recommended to reach out to a technician or Frigidaire's customer support for help. They may be able to guide you through further troubleshooting steps, or arrange for a service call if necessary.

To reset the control panel on your Frigidaire dishwasher, you can try the following steps:
1. Start by flipping the household circuit breaker associated with the dishwasher off.
. Leave the circuit breaker off for around 5 minutes to allow for a full power reset.
3. After 5 minutes, flip the circuit breaker back on.
4. Open the dishwasher door and locate the control panel.
5. Press and hold down the "Hi-Temp Wash" button and "Start/Cancel" button simultaneously.
6. Continue holding both buttons down for about 3 seconds until the control panel lights briefly blink.
7. Release the buttons and close the dishwasher door.
8. The control panel should now be reset, and you can try using the dishwasher again.
Note: The specific instructions and button combination may vary depending on the model of your Frigidaire dishwasher. If the above steps do not work, consult the dishwasher's manual or contact Frigidaire customer support for model-specific instructions.

There could be several reasons why your Frigidaire dishwasher is not starting. Some common causes and troubleshooting tips include:
1. Power supply: Ensure that the dishwasher is properly connected to a power source and that the circuit breaker or fuse for the dishwasher is functioning correctly.
2. Door latch: Make sure the dishwasher door is securely closed and latched. If the door is not fully closed, the dishwasher will not start.
3. Delay start or control lock: Check if the dishwasher has a delay start feature activated or if the control panel is locked. Review the user manual to learn how to disable these features.
4. Water supply: Verify that the dishwasher is receiving an adequate water supply. Ensure the water supply valve is turned on completely and there are no kinks or clogs in the water inlet hose.
5. Float switch: The dishwasher features a float switch that detects the water level inside the appliance. If the float switch is stuck or damaged, the dishwasher may not start. Check the float assembly for any obstructions or damage.
If none of these troubleshooting tips resolve the issue, it is recommended to contact Frigidaire Customer Support or a professional technician for further assistance.

The blue light flashing on your Frigidaire Gallery dishwasher indicates that the dishwasher is in the process of washing or drying the dishes. This light serves as an indicator to show that the dishwasher is functioning properly and actively working. In some models, the light may also indicate the completion of a cycle or be used as a reminder to refill the rinse aid dispenser. It is important to refer to your dishwasher's user manual for specific information about the meaning of the blue light on your particular model.