Frigidaire FGHD2368TF user manual

To fix ice build-up in your Frigidaire FGHD2368TF freezer, follow these steps:
1. Unplug the refrigerator and locate the ice build-up. It is usually found near the back panel of the freezer or on the bottom.
2. Empty the freezer of any perishable items and transfer them to a cooler with ice packs to keep them chilled while you work.
3. Remove the shelves, drawers, and any other removable parts from the freezer to access the affected area easily.
4. Using a hairdryer, gently thaw the ice build-up by directing the warm air towards it. Be cautious not to overheat or melt any plastic parts.
5. Place towels or a mop bucket below the affected area to catch any water that may drip during the defrosting process.
6. Once the ice has melted, use a sponge or towel to wipe away any excess water. Take this opportunity to clean the inside of your freezer.
7. Check for any clogged or frozen drain holes at the bottom of the freezer compartment. Use a mixture of warm water and mild dish soap to clean the drain hole and remove any debris.
8. After cleaning the drain hole, pour a small amount of hot water to ensure it flows freely through the drain tube. This step is crucial to prevent future ice build-up.
9. Reassemble the shelves, drawers, and other removable parts back into the freezer.
10. Plug in the refrigerator and allow it to cool down to the desired temperature before placing the food back inside.
Regularly cleaning and organizing the freezer, ensuring proper ventilation, and avoiding overstuffing it will help prevent future ice build-up.

To take your Frigidaire refrigerator out of demo mode, you'll need to reset the controls. Here's how to do it:
1. Press and hold the "+ - Set" button(s) located on the temperature control panel.
. While holding the buttons, press and release the "On/Off" button.
3. Keep pressing the "+ - Set" button(s) until the display flashes (about 3-5 seconds).
4. Once you see the display flash, release the "+ - Set" button(s).
The unit should reset, and it will be out of demo mode now.
If this information doesn't work for your specific model, you may refer to your user manual or contact Frigidaire's customer service for a more specific set of instructions.

The flashing "H" on a Frigidaire refrigerator, specifically the FGHD2368TF model, typically indicates a high-temperature alarm. This means that the temperature inside the refrigerator has risen above the desired or recommended level. It is a warning sign that there may be an issue with the refrigerator, such as a door left open, a malfunctioning cooling system, or insufficient air circulation. It is suggested to check the door seals, ensure proper airflow, and make sure the temperature settings are properly adjusted. If the issue persists, it may be necessary to consult the user manual or contact Frigidaire customer support for further assistance.