FoodSaver V3835 user manual

The Moist button on the FoodSaver V3835 is designed to help you vacuum seal moist or juicy foods more effectively. When you have foods with higher moisture content, such as fruits, vegetables, or meats, the Moist button adjusts the vacuum seal process to prevent liquids from being sucked out of the bag during sealing. This feature helps to ensure a better seal and maintain the freshness of your food.

The flashing lights on your FoodSaver V3835 vacuum sealer could indicate a few different things. Here are some possible causes:
1. Bag misalignment: The machine might be sensing that the bag is not properly aligned or inserted. Ensure that the bag is placed correctly and securely in the sealing channel.
2. Bag obstruction: Check if there is any obstruction in the sealing area, such as food particles, liquid, or debris. Make sure to clean the sealing area thoroughly.
3. Overheating: If you've been using the vacuum sealer repeatedly without giving it enough time to cool down, the flashing lights could indicate that the machine has become overheated. In this case, allow the sealer to rest and cool down before using it again.
4. Maintenance required: Sometimes, the flashing lights could indicate that your vacuum sealer requires maintenance or servicing. Refer to the user manual for instructions on how to perform any necessary maintenance procedures.
If the flashing lights persist despite troubleshooting, it's advisable to contact FoodSaver's customer support for further assistance or to seek professional repairs.

There could be several possible reasons why your FoodSaver V3835 has stopped working. Here are a few common issues:
1. Power supply: Ensure that the FoodSaver is properly plugged into a functioning power outlet. Check if the power cord is damaged or loose. If necessary, try using a different outlet or power source.
2. Vacuum seal bag: Make sure that the vacuum seal bag is positioned correctly and firmly locked in place. If the bag is not sealed properly, it can prevent the vacuum sealing process from functioning correctly.
3. Vacuum pump: The vacuum pump might be dirty or clogged, preventing it from creating suction. Clean the pump by removing any debris or food particles that may have accumulated. Refer to the instruction manual for detailed cleaning instructions.
4. Sealing strip: Over time, the sealing strip on the FoodSaver can wear out and lose its effectiveness. Check if the strip appears damaged or worn out. If necessary, replace the sealing strip according to the manufacturer's instructions.
5. Defective parts: In some cases, the malfunction may be due to defective parts or components, such as a faulty motor or circuit board. If you have checked all the above possibilities and the FoodSaver still does not work, it may be necessary to contact FoodSaver customer support for further assistance or to inquire about repair or replacement options.