FoodSaver FM2100 user manual

If the dry and moist lights are flashing on your FoodSaver FM2100, it means that the machine is experiencing an error. Here are a few possible reasons and solutions:
1. Poor seal: Ensure that the bags are properly inserted into the machine and that there are no wrinkles or food particles on the sealing strip. Clean the sealing strip if necessary, and try again.
2. Excessive moisture: If there is too much moisture present in the food or bag, it can interfere with the sealing process. Make sure the food or contents are dried properly before vacuum sealing.
3. Damaged sealing strip: Inspect the sealing strip for any signs of damage or wear. If it appears worn out or damaged, it may need to be replaced.
4. Overheating: If the machine has been in use for an extended period, it may automatically shut off to prevent overheating. Allow it to cool down before using it again.
If the problem persists despite checking the above factors, it is recommended to contact FoodSaver customer support or refer to the user manual for further troubleshooting assistance.

There could be several reasons why your FoodSaver FM2100 is not detecting the bag. Here are a few possibilities:
1. Bag positioning: Ensure that the bag is placed correctly in the vacuum channel. The edges of the bag should be aligned with the sealing strip and the vacuum channel should be free from any obstructions or debris.
2. Sealing strip condition: Check the condition of the sealing strip. Make sure it is clean, free from any food particles or residue, and not damaged or worn out. A worn-out sealing strip may not create a proper vacuum seal and may cause detection issues.
3. Bag quality: Ensure you are using FoodSaver bags specifically designed for your machine. Lower-quality or generic bags may not be recognized by the machine due to variations in size or thickness.
4. Moisture or debris: Wipe the vacuum channel clean of any moisture, crumbs, or debris that may hinder the bag detection mechanism. A clean and dry channel helps in proper bag detection.
5. Machine malfunction: If none of the above solutions work, there might be a malfunction in the machine's bag detection sensor or mechanism. In this case, it is best to contact FoodSaver customer support or a technician to troubleshoot or repair the machine.
It's worth noting that different FoodSaver models may have slight variations in bag detection mechanisms and troubleshooting steps. Refer to your user manual for specific instructions related to your FM2100 model.