Epson WORKFORCE-WF-3640 user manual

To load photo paper into your Epson WorkForce WF-3640 printer, follow these steps:
1. Turn on the printer and extend the paper tray(s).
2. Slide out the paper support and paper stopper.
3. Adjust the paper guides to fit the width of the photo paper you are using.
4. Take the stack of photo paper and fan the sheets to prevent them from sticking together.
5. Load the photo paper with the printable side facing down into the main paper tray. Make sure it is positioned against the right side and aligns with the paper guides.
6. Gently push the photo paper stack into the paper tray until it stops.
7. Slide in the paper stopper to hold the photo paper in place.
8. Close the paper support and push it back into the printer.
9. Adjust the paper guides snugly against the photo paper.
10. If prompted, select the appropriate paper settings on the printer's control panel or on your computer.
Now you should be ready to print on photo paper using your Epson WF-3640 printer. Note that additional settings, such as print quality and paper size, can be adjusted through the printer software on your computer.

To clean the rollers on your Epson WF 3640 printer, you can follow these steps:
1. Turn off the printer and unplug it from the power source.
. Open the printer cover to access the internal components.
3. Locate the rollers inside the printer. They are usually rubber or plastic cylindrical parts that help feed the paper through the machine.
4. Moisten a lint-free cloth or a cotton swab with water or isopropyl alcohol. Make sure it is not dripping wet.
5. Gently wipe the rollers, rotating them manually to clean all sides. Be careful not to apply excessive force as you might damage the rollers.
6. If there are stubborn dirt or ink stains on the rollers, you can use a specialized rubber rejuvenator or rubber roller cleaner available at office supply stores. Follow the product instructions for proper usage.
7. Once the rollers are clean, leave them to air dry for a few minutes.
8. Close the printer cover, plug it back in, and turn on the printer.
9. Test the printer by printing a few pages to ensure the rollers are functioning properly.
Note: It is good practice to clean the rollers regularly to prevent paper jams and ensure smooth printing.

The Epson WorkForce WF-3640 was released in the year 2014.

To connect your Epson Workforce WF-3640 wireless printer, follow these steps:
1. Make sure your printer is powered on and connected to a power source.
. Locate the printer's control panel on the front of the printer.
3. Press the "Home" button on the control panel.
4. Use the arrow keys to navigate to the "Setup" or "Settings" menu.
5. Select the "Wi-Fi Setup" or "Network Setup" option.
6. Choose "Wi-Fi Setup Wizard" from the available options.
7. Select your wireless network from the list of available networks.
8. Enter your Wi-Fi network password if prompted.
9. Follow the prompts on the screen to complete the wireless setup process.
Once your printer is connected to the wireless network, you can begin printing wirelessly from your computer or mobile devices that are also connected to the same network.