Epson EH-TW740 user manual

1. Download and Install "Epson iProjection" app from Google Play Store or Apple App Store.
2. Connect both your phone and your Epson EH-TW740 projector to the same Wi-Fi network.
3. Open the Epson iProjection app on your phone.
4. Click on the "Projector" option at the bottom of the screen.
5. This will search for available projectors in the network. Once the Epson EH-TW740 is found, tap on it to select.
6. You should now be able to project images, documents, and videos directly from your phone to the projector.
7. If you want to mirror your phone's screen, go to Settings and look for Cast Screen option (the name might vary depending on your phone). Once you've located this, you can select your projector from the list of available devices to mirror your phone’s screen on the projector.
Note: Step 7 might not work with all models and brands of smartphones.
Remember that the specific instructions might vary slightly, depending on the exact model of your phone and projector, and the operating system your phone uses. You might also need to refer to the manual for your specific phone or projector, if the steps above don't work.

There could be several reasons why the power button is not working on your Epson projector remote:
1. Low battery: Check if the batteries in your remote are running low or dead. Replace them with fresh batteries if necessary.
2. Remote range: Ensure you are within the proper range of the projector. Stand closer to the projector and try using the remote again.
3. Line of sight: Make sure there are no obstacles between the remote and the projector. Sometimes, other objects or furniture may be blocking the infrared signal between the two devices.
4. Syncing issue: If you have recently replaced the batteries or experienced a power outage, you may need to re-sync your remote with the projector. Consult the projector's manual or instructions to find the specific steps for syncing the remote.
5. Defective remote: If none of the above solutions work, there could be a defect with the remote itself. In this case, you may need to contact Epson customer support or consider replacing the remote.

The contrast ratio of the Epson EH-TW740 is 16,000:1.

To manually connect your Epson EH-TW740 projector, you can follow these steps:
1. Turn off the projector and any devices connected to it.
. Locate the HDMI or VGA input ports on the back of the projector.
3. Connect your video source device (such as a laptop, DVD player, or gaming console) to the projector using an appropriate cable (HDMI or VGA). Make sure the cable is securely connected to both the projector and the device.
4. Turn on the projector and the video source device.
5. Use the projector's remote control to navigate to the Input or Source menu. This can usually be done by pressing the "Source" or "Input" button on the remote or the projector itself.
6. Select the corresponding input source on the projector's menu that matches the port you connected your device to (HDMI 1, HDMI 2, VGA, etc.).
7. The projector should now display the content from your connected device. Adjust the focus and other settings as needed.
Please note that the steps may vary slightly depending on the specific model of your Epson projector. It's recommended to consult the user manual for detailed instructions if you encounter any issues.