Epson ECOTANK-ET-2721 user manual

There could be several reasons why your new Epson EcoTank printer is not printing even when the ink is full. Here are a few possible explanations:
1. Air Bubbles: Sometimes, air bubbles can get trapped inside the ink tubes, preventing the ink from flowing properly. This can be resolved by running a few cleaning cycles or by gently tapping the ink tanks to dislodge any air bubbles.
2. Printhead Blockage: The printhead nozzles might be clogged, preventing the ink from being properly dispensed onto the paper. You can try using the printer's built-in printhead cleaning utility to clear any blockages.
3. Incorrect Setup: Ensure that you have correctly installed the ink tanks and that they are securely snapped into place. Also, make sure that the printer status is not set to "Offline" or "Paused."
4. Outdated Drivers or Firmware: Make sure you have the latest printer drivers and firmware installed on your computer. You can check the Epson website for any available updates.
5. Paper Jam: Check for any paper jams inside the printer, as they can disrupt the printing process. Remove any stuck paper and ensure that the paper trays are loaded correctly.
6. Low Ink Sensors: Although the ink tanks may appear full, it is possible that the printer's sensors are incorrectly detecting low ink levels. Try removing and reinserting the ink tanks to see if that resolves the issue.
If none of these solutions work, it may be necessary to contact Epson customer support for further assistance or consider returning the printer for a replacement or refund.

There could be several reasons why your Epson printer is printing blank pages despite having ink. Here are a few possible causes and solutions:
1. Ink Cartridge Installation: Ensure that the ink cartridges are correctly installed. Open the printer cover and check if the cartridges are securely inserted in their respective slots.
2. Ink Levels: Check the ink levels in the printer software or on the printer's control panel. If the ink levels are low or empty, replace or refill the cartridges as necessary.
3. Print Head Clogging: If the printer has not been used for a while, the print heads might be clogged. Run a print head cleaning cycle to clear any blockages. This process can typically be done through the printer software or control panel.
4. Paper Alignment: Make sure that the paper is correctly loaded in the printer tray and aligned properly. Incorrect paper alignment can result in blank pages being printed.
5. Printing Preferences: Check your printing preferences or settings to ensure that the correct paper size, media type, and print quality are selected. Incorrect settings may cause the printer to print blank pages.
6. Driver Issues: Verify that you have the latest printer driver installed. Outdated or corrupted drivers can sometimes lead to printing problems. Visit the Epson website or use the provided driver software to update the printer driver.
If none of these solutions resolve the issue, contacting Epson customer support may be necessary for further assistance or troubleshooting guidance.

There is no official information stating that the Epson EcoTank ET-2720 is discontinued. However, it is always a good idea to check with official Epson channels or retailers to get the most accurate and up-to-date information about product availability.

It is not necessary to leave your Epson EcoTank printer on all the time. However, turning it off completely might lead to frequent cleaning cycles when you turn it back on, which might waste some ink. If you use your printer frequently, it is generally considered okay to leave it in sleep mode or standby mode, as long as it is not causing any power consumption concerns.