ECOVACS DEEBOT-N8+ user manual

Ecovacs Deebot supports various commands, which can be issued through a mobile application or voice assistants like Amazon Alexa or Google Home. Here are some common commands:
1. Start Cleaning: Start the cleaning process.
. Stop Cleaning: Stop the current cleaning task.
3. Pause Cleaning: Pause the current cleaning task.
4. Go Home: Send the Deebot back to its charging dock.
5. Find the Robot: The Deebot will make a noise to help you locate it.
6. Set to Auto mode: Makes the robot clean automatically.
7. Set to Spot mode: The robot will clean a specific spot intensively.
8. Set to Edge mode: The robot will only clean along the edges of the room.
9. Start mop Cleaning: The robot will start mopping the floor.
10. Schedule Cleaning: You can set a specific time for the robot to clean.
For Amazon Alexa, commands are typically formulated like "Alexa, ask Deebot to start cleaning". For Google Home, this would be "Hey Google, start Deebot".

There are several signs that might indicate your DEEBOT needs a new battery:
1. Decreased cleaning time: If your DEEBOT is running out of battery more quickly than before and is unable to complete a full cleaning cycle, it could be a sign that the battery capacity has decreased.
2. Slow or weak movement: If your DEEBOT is moving slower or has difficulty navigating obstacles, it could be because the battery is not generating enough power.
3. Failure to charge: If you notice that your DEEBOT is not charging properly or not holding a charge for a sufficient amount of time, it could be due to a faulty battery.
4. Error messages: Some DEEBOT models display error messages or use LED lights to indicate battery-related issues. If you see any error messages or unusual patterns on the device, it might be related to the battery.
If you are still unsure, you can contact the manufacturer's customer support or refer to the user manual for specific troubleshooting steps or guidance.

To get your DEEBOT to clean certain areas, you can follow these steps:
1. Set up virtual boundaries or create no-go zones: Most DEEBOT models come with virtual boundary strips that you can place in the desired area to prevent the robot from entering. Alternatively, you can use the DEEBOT smartphone app to draw virtual boundaries or create no-go zones to block off specific areas.
2. Use spot cleaning mode: Some DEEBOT models have a spot cleaning mode specifically designed for cleaning a particular area. Typically, this mode allows you to manually direct the robot to a specific spot and it will clean the area thoroughly.
3. Schedule cleaning mission: DEEBOT models with scheduling features allow you to set specific cleaning times for certain areas. Using the DEEBOT app, you can create cleaning routines and specify the areas you want the robot to clean at each scheduled time.
4. Manually guide the robot: In case your DEEBOT doesn't have advanced features, you can manually guide it to clean certain areas by using the directional controls on the remote control or smartphone app. Direct the robot to the desired area, and it will clean that specific spot.
Note: Available features may vary depending on the DEEBOT model you own. Consult the user manual or the manufacturer's website to find specific instructions and features for your DEEBOT model.

The auto button on the Ecovacs Deebot N8+ is a feature that enables the robot vacuum to clean your home automatically. When pressed, the Deebot N8+ will navigate your space, using its mapping and navigation technology to thoroughly clean your floors. It will intelligently determine the cleaning path and avoid obstacles in its way, ensuring efficient cleaning.