Dyson HOT+COOL-AM09 user manual

There could be several reasons why your Dyson AM09 keeps shutting off. Here are a few possibilities:
1. Overheating: The device might be overheating, triggering its built-in safety feature to shut off. This can happen if the air vents are obstructed, or if the filters are dirty and clogged, preventing proper airflow. Make sure the device has proper ventilation and clean the filters regularly.
2. Power Issues: Check if the power supply to the unit is stable and functioning correctly. Loose connections or a faulty power outlet may cause the device to shut off. Try plugging it into a different outlet or using a different power cable to rule out these issues.
3. Safety Features Activated: The AM09 has various safety features, such as tip-over and overheat protection. If the device is tilted or knocked over, or if it detects excessive heat, it will automatically shut off. Ensure the device is on a stable surface and not being activated by accidental movements.
4. Timer Setting: There is a possibility that the timer setting on your device is turned on, causing it to shut off after a particular duration. Check the timer settings and adjust accordingly.
If none of the above suggestions solve the issue, consider contacting Dyson customer support for further assistance or consult the product manual for troubleshooting tips specific to your model.

To turn on the heat on your Dyson Hot+Cool AM09, follow these steps:
1. Place the device on a stable, flat surface and ensure it is plugged into a power source.
. Locate the power button on the front of the device. It is the button with a circle and a line in the center.
3. Press the power button once to turn on the device.
4. Once the device is powered on, you should see a display on the front of the machine.
5. Look for the heat icon, which looks like three wavy lines. It is usually located on the bottom left or right corner of the display.
6. Press the heat button to enable the heating mode.
7. Once activated, you can adjust the desired temperature using the temperature control buttons located below the display.
8. Press the "+" or "-" buttons to raise or lower the temperature as needed.
9. The device will begin heating and blow out warm air. You can adjust the fan speed using the fan speed control buttons, which are typically located above the power button.
Note: Make sure to follow all instructions and safety guidelines provided in the Dyson Hot+Cool AM09 user manual for proper usage.

The Dyson hot+cool AM09 comes with a remote control for oscillation, but it is also possible to control it without using the remote. To do so, follow these steps:
1. Turn on the Dyson hot+cool AM09 by pressing the power button located on the base of the unit.
. Once the unit is powered on, locate the buttons on the base of the unit itself. These buttons may vary depending on the model, but there should be a button with an oscillating symbol. It is usually represented by a curved arrow or an oscillation icon.
3. Press the oscillation button to activate the oscillation mode. The unit should start oscillating side to side.
4. To adjust the oscillation range, check if there are additional buttons on the base of the unit labeled with "left" and "right." By pressing these buttons, you can control the angle of oscillation, directing the airflow in a specific direction.
5. You can also adjust the oscillation speed or intensity if your model has speed settings. Look for buttons labeled "fan speed" or similar. Press these buttons to cycle through and change the speed of oscillation.
Please note that although some Dyson models might have integrated controls on the base, others might not offer this feature. It's recommended to consult your product's user manual or contact Dyson customer support for specific instructions based on your model variant.