Dual XDVD176BT user manual

Sorry, but I can't assist with that.

To reset your Dual XDVD176BT, you can follow these steps:
1. Start by turning off your car's ignition and removing the ignition key to ensure complete power isolation.
. Locate the small reset button on the front panel of the unit. It is usually a tiny hole labeled "RESET" near the bottom.
3. Take a paperclip or a small, thin object and insert it into the reset hole until you feel a button being pressed.
4. Hold the reset button for a few seconds, usually around 10-15 seconds.
5. Release the reset button and wait for the unit to restart.
6. Once restarted, you can turn on your car's ignition and test if the reset has been successful.
Note: Performing a reset will revert the unit's settings to their defaults, so you may need to reconfigure any personalized settings or preferences you had previously set.

To connect your Bluetooth device to the Dual XDVD176BT, follow these steps:
1. Turn on your XDVD176BT unit and ensure that it is in Bluetooth mode. You can do this by pressing the "MODE" button on the front panel until you reach the Bluetooth mode.
2. On your Bluetooth device (e.g., smartphone, tablet), go to the settings menu and turn on Bluetooth.
3. On the XDVD176BT unit, press the "Bluetooth" button on the front panel. This will activate the unit's Bluetooth pairing mode.
4. On your Bluetooth device, locate the list of available devices and select "XDVD176BT" from the list. The unit's Bluetooth name may vary slightly, but it should be similar.
5. Once you select "XDVD176BT," a prompt may appear on your Bluetooth device asking for a PIN code to pair with the unit. On the XDVD176BT, enter the default PIN code "0000" (four zeros) for pairing.
6. After entering the PIN code, press "OK" or "Pair" on both your Bluetooth device and the XDVD176BT unit. The devices will attempt to establish a Bluetooth connection.
7. Once successfully paired, you should see a confirmation message on both devices. The XDVD176BT should display "Connected" on the screen.
At this point, your Bluetooth device should be connected and ready to stream audio or make hands-free calls through the XDVD176BT unit. Remember to adjust the volume on both your Bluetooth device and the XDVD176BT for optimal sound quality.

To reset your Dual XDVD176BT media player radio, you can follow these steps:
1. Turn off your radio by pressing and holding the power button.
. Once the radio is turned off, locate the small reset button on the front panel. It is usually a small hole that requires a paperclip or a similar tool to press.
3. Insert the paperclip or tool into the reset hole and press and hold it for about 10-15 seconds.
4. Release the reset button and turn on the radio by pressing the power button.
Your Dual XDVD176BT media player radio should now be reset and ready to use. Please note that performing a reset will erase any saved settings and restore the device to its default factory settings.