dji OM-4 user manual

The DJI OM 4 has several hand gestures that allow for hands-free control of the gimbal:
1. Start/Stop Recording: By making a "V" with your fingers, you can activate or stop video recording.
2. Take a Photo: By making a "V" gesture and holding it, you can trigger the camera to capture a photo.
3. Active Track: By showing your palm towards the camera, you can enable Active Track, which allows the gimbal to track and follow your movements.
4. Gesture Control: With Gesture Control enabled, you can use a "Peace" sign to start or pause video recording and make a "Palm" gesture to take a photo.
Please note that gesture control features may vary depending on the specific firmware and settings of your DJI Osmo 4. It is always recommended to refer to the user manual and ensure you have the latest firmware installed for the most accurate information.

Yes, you can use the DJI OM 4 without the app. The gimbal has basic functionality that can be used independently, such as stabilizing your smartphone and controlling the gimbal manually using the physical buttons on the handle. However, you would miss out on a range of advanced features and settings that can only be accessed through the companion DJI Mimo app. It is recommended to use the app to unlock the full potential of the DJI OM 4.

To connect your DJI OM 4 to your phone, follow these steps:
1. Download and install the DJI Mimo app on your smartphone. It's available for both iOS and Android devices.
2. Turn on your DJI OM 4 and ensure that Bluetooth is enabled on your phone.
3. Open the DJI Mimo app on your phone.
4. On the main screen of the app, tap on the camera icon at the bottom left corner to access the camera view.
5. On the left side of the screen, tap on the "Connect" button to initiate the pairing process.
6. The app will search for available devices, and when it detects your DJI OM 4, it will appear on the screen. Tap on the name of your device to connect to it.
7. Once connected, the app will guide you through any necessary firmware updates for both the gimbal and your phone. Follow the on-screen instructions to complete the update process.
8. After the update, you'll be able to control the DJI OM 4 from your phone, access various shooting modes, and adjust camera settings.
That's it! Your DJI OM 4 should now be successfully connected to your phone via the DJI Mimo app.

To check if the DJI OM 4 is fully charged, follow these steps:
1. Connect the DJI OM 4 to a power source using the provided USB Type-C cable and adapter.
2. Look for the LED indicator on the grip of the DJI OM 4.
3. While charging, the LED indicator will illuminate red, indicating that the device is being charged.
4. When the DJI OM 4 is fully charged, the LED indicator will turn green.
5. You can also check the battery level through the DJI Mimo app on your connected smartphone. The app will display the current battery percentage, which will reach 100% when fully charged.
Note: It usually takes approximately 90 minutes to fully charge the DJI OM 4.