Dimplex XLE150 user manual

There could be several reasons why your Dimplex XLE150 heater is not working. Here are some steps you can try to troubleshoot the issue:
1. Check the power supply: Ensure that the heater is plugged into a working power outlet. Check the circuit breaker or fuse box to make sure there is no power interruption.
2. Reset the heater: Some Dimplex heaters have a reset button. Try pressing the reset button or turning off the power for a few minutes and then turning it back on.
3. Check the thermostat: Make sure the thermostat is set to the desired temperature and is not set too low. Adjust the temperature settings to see if the heater starts working.
4. Inspect the wiring: Examine the power cord and make sure it is not damaged or frayed. If it is, contact a professional electrician to replace it.
5. Clean the heater: Dust or debris buildup can affect the heater's performance. Clean the heater and ensure that the air vents are clear of any obstructions.
6. Contact Dimplex support: If all the above steps fail to resolve the issue, it is best to contact Dimplex customer support or a qualified technician who can diagnose and repair any internal electrical faults.
Remember, it is important to prioritize your safety when troubleshooting electrical devices. If you are unsure or uncomfortable with any step, seek professional assistance.

The red light on your Dimplex XLE150 heater is an indication that the heater is in standby mode. This is a normal operation and means that the heater is ready to be turned on. Once you turn on the heater using the remote control or the control panel, the red light will stop flashing and the heater will begin to heat up.