Denon PMA-600NE user manual

The Denon P

To pair your Denon PMA-600NE speaker, you'll need to follow these steps:
1. Power on the speaker and ensure that it is in pairing mode. You can do this by pressing and holding the Bluetooth button on the front of the speaker until the Bluetooth LED starts blinking.
2. On your device (smartphone, tablet, etc.), go to the Bluetooth settings and turn it on.
3. Look for the Denon PMA-600NE speaker in the list of available Bluetooth devices. It should appear as "Denon PMA-600NE" or something similar. Select it to initiate the pairing process.
4. If prompted, enter the pairing code provided by the speaker. Typically, the pairing code is "0000" or "1234", but check the speaker's manual or documentation for the exact code.
5. Once the pairing is successful, the Bluetooth LED on the PMA-600NE speaker will stop blinking and remain solid. Additionally, your device will show a notification or confirmation that it is connected to the Denon PMA-600NE.
Now you should be able to play audio from your device through the Denon PMA-600NE speaker via Bluetooth. Remember to keep your device within the Bluetooth range of the speaker for a stable connection.

No, the Denon PMA-600NE does not have built-in Bluetooth functionality.

The Denon PMA-600NE is a stereo integrated amplifier. Here are its main specifications:
Power Output:
- 45 watts per channel (8 ohms, 20Hz - 20kHz, 0.07% THD)
- 70 watts per channel (4 ohms, 20Hz - 20kHz, 0.7% THD)
Signal-to-Noise Ratio:
- 105dB (LINE, IHF-A)
- 74dB (Phono MM, IHF-A)
Frequency Response:
- 10Hz - 100kHz (+1, -3dB, Direct Mode)
Total Harmonic Distortion:
- 0.02% (1kHz, 8 ohms, 30W)
Input Sensitivity/Impedance:
- LINE: 200mV / 47k ohms
- Phono MM: 2.5mV / 47k ohms
Number of Inputs:
- 4x RCA (Line Level)
- 1x Phono (MM)
Number of Outputs:
- 2x Speaker (Binding Posts)
- 1x Subwoofer Pre-Out (RCA)
- 1x Headphone (1/4" Jack)
Other Features:
- Bluetooth connectivity with aptX support
- Built-in MM phono preamp
- DAC Mode with optical and coaxial inputs
- Optical and coaxial digital inputs (2 each)
- Analog Mode to disable digital circuitry
- Direct Mode for a pure audio signal path
- Source Direct function for bypassing tone control
- Tone Control (Bass/Treble) with default flat option
Dimensions (W x H x D):
- 434mm x 122mm x 308mm (17.1" x 4.8" x 12.1")
Weight:
- 6.8 kg (15 lbs)