Denon AVR-S700W user manual

To set up the Denon AVR-S700W, follow these steps:
1. Unpack the AVR-S700W and place it in your desired location.
. Connect the speakers to the speaker terminals on the back of the receiver. Make sure to match the positive (+) and negative (-) connections correctly.
3. Connect your audio/video sources to the receiver using HDMI cables. For example, connect your TV, Blu-ray player, gaming console, or other devices to the HDMI inputs on the back of the receiver. Use high-speed HDMI cables for optimal performance.
4. If you have any analog audio sources, such as a turntable or cassette player, connect them to the analog audio inputs on the back of the receiver using RCA cables.
5. Connect your TV to the HDMI output on the receiver using another HDMI cable.
6. Plug in the power cord and turn on the AVR-S700W.
7. Follow the on-screen setup wizard on your TV to configure your network settings, speaker setup, and other options. This will involve using the included remote control to navigate through the menus and make selections.
8. Once the setup is complete, you can adjust the audio settings, such as speaker levels and audio modes, according to your preferences.
9. Optionally, you can download the Denon AVR Remote app on your smartphone or tablet to control the receiver wirelessly.
Please note that this is a general guide, and the specific steps may vary depending on your setup and personal preferences. It's always a good idea to consult the AV receiver's user manual for detailed instructions on setup and operation.

To reset your Denon AVR-S700W receiver, follow these steps:
1. Turn off the power using the power button on the front panel (not the main switch at the back).
. Once the receiver is powered off, press the "Tuner Preset Ch +" and "Zone2 Source" buttons simultaneously on the front panel; keep them pressed. If you have a European model, press the "Tuner Preset Ch +" and "Tuner Preset Ch -" buttons simultaneously.
3. While keeping both buttons pressed, turn on the main power switch. The front panel display will start flashing at intervals of about 1 second.
4. Release your fingers from the two buttons when the display starts flashing.
5. Once the receiver resets, it will go into standby mode. Now, turn it on and check to see if the problem is fixed.
Remember that this process will reset all settings back to their factory defaults, so you will need to set up your receiver again.
If this does not solve your issue, it’s recommended to contact Denon Support for further assistance.

The Denon AVR-S700W was released in 2014.

The Manufacturer's Suggested Retail Price (MSRP) for the Denon AVR-S700W is $499.