D-Link DIR-825 user manual

The D-Link DIR-825 is generally considered a reliable and feature-rich router. It offers high-speed wireless connectivity and supports dual-band technology for optimal performance. It also has a strong range and supports advanced features like QoS (Quality of Service) for prioritizing network traffic, guest network access, and parental controls.
However, like any router, it can have occasional issues or may not meet everyone's specific needs. Some users have reported occasional connectivity problems or difficulty in setting up certain features. It is always advisable to research and read customer reviews before purchasing a router to ensure it meets your specific requirements.

To configure your D-Link DIR-825 as an access point, you can follow these steps:
1. Connect your computer to one of the LAN ports of the DIR-825 using an Ethernet cable.
. Open a web browser on your computer and enter the default IP address of the router in the address bar. The default IP address is usually http://192.168.0.1 or http://192.168.1.1. Press Enter.
3. Enter the router's username and password. The default username is usually "admin," and the default password is blank (leave it empty). If you've changed the login credentials, enter the appropriate details.
4. Once logged in, go to the "Setup" menu or tab.
5. Under the "Internet Connection" section, select "Manual Internet Connection Setup" or "Connection Type."
6. Choose the option "None" or "Disabled." This will disable the router's DHCP server and allow it to work as an access point.
7. Scroll down to the "Router Settings" section, and assign an IP address that is within the same subnet range as your main router but outside of its DHCP range. For example, if your main router's IP address is 192.168.0.1 and its DHCP range is from 192.168.0.100 to 192.168.0.200, you can set a static IP like 192.168.0.2 for the DIR-825.
8. Set the same subnet mask as your main router. For most home networks, this is usually 255.255.255.0.
9. Leave the "Default Gateway" field blank.
10. Disable the DNS Relay feature if enabled.
11. Save the settings and restart the router.
12. Disconnect your computer from the LAN port and connect it to one of the LAN ports on your main router.
13. Connect an Ethernet cable from one of the LAN ports on the main router to one of the LAN ports on the DIR-825.
14. Power on the DIR-825 and wait for it to boot up.
15. Your D-Link DIR-825 is now configured as an access point, extending your network's wireless coverage.
Note: Make sure to disable the DHCP server on the DIR-825 to prevent conflicts with your main router. Also, it's important to set the same SSID (network name), security type, and password on both the main router and the DIR-825 to ensure seamless roaming between the access points.

To log into your Dlink DIR-825 router, follow these steps:
1. Connect your computer or mobile device to the router's network either via Ethernet cable or Wi-Fi.
. Open a web browser (such as Google Chrome, Mozilla Firefox, or Internet Explorer) on the connected device.
3. In the address bar of the web browser, type the default login IP address for the Dlink DIR-825 router, which is usually "192.168.0.1" or "192.168.1.1" (without quotes) and press Enter.
4. This will take you to the router's login page.
5. On the login page, you will be prompted to enter your router's username and password. If you haven't changed them before, the default username is usually "admin" and the default password is either "admin" or left blank. Try these combinations first and if they don't work, refer to your router's manual or manufacturer's website to find the correct default login credentials.
6. After entering the correct username and password, click on the "Login" or "Sign In" button.
7. You should now be logged into your Dlink DIR-825 router's web interface, where you can access and modify various router settings.
Note: If you've changed the router's default IP address or login credentials before and cannot remember them, you may need to perform a factory reset on the router. This will reset all settings to their default values and allow you to log in using the default credentials mentioned above.

The default admin password for the D-Link DIR-825 is either blank or "admin".