D-Link DAP-1620 user manual

1. Plug the DAP-1620 into a wall outlet within wireless range of your router.
2. Connect to the extender's network named "Dlink-Extender" which should appear on your list of available networks. Alternatively, you can connect to the extender via an Ethernet cable.
3. Open a web browser and type in "http://dlinkap.local" on the address bar. If for some reason it does not work. You can use the IP "192.168.0.50".
4. You'll be prompted to run a setup wizard. Click yes or next to proceed.
5. Create a new password and click next. You'll need this password for future access to the extender's settings.
6. The extender will now search for available WiFi networks. Choose your home network from the list that appears.
7. Enter your home network's password and click next.
8. Choose a network name (SSID) for your extended network. You can also change the password for this network.
9. The settings will be saved and the extender will reboot.
After the extender reboots, you should see the new SSID on your list of available networks. Connect to the extender and enter the password you chose. The setup is complete.
Remember that the best place to locate the extender is halfway between your router and the area without WiFi. If the extended signal is poor, move the extender closer to the router.

To determine if your D-Link Wi-Fi extender is working properly, follow these steps:
1. Power on your Wi-Fi extender and wait for it to boot up. Make sure it is properly connected to a power source and turned on.
2. Locate the Wi-Fi indicator lights on the extender. These lights usually indicate the status of the connection.
3. The initial power indicator should turn solid after booting up successfully. This indicates that your extender has power.
4. Look for the Wi-Fi signal indicator light. Once the extender has established a connection to your existing Wi-Fi network, this light should turn solid or blink.
5. Connect to the extended Wi-Fi network on your computer or mobile device. On your device, search for available Wi-Fi networks and look for the network name (SSID) of your extender. Connect to it using the provided Wi-Fi network key or password.
6. Once connected, try accessing the internet or using any online service. If your device successfully connects to the internet and works well, it means your D-Link Wi-Fi extender is functioning correctly.
7. Additionally, you can check the signal strength of your extended Wi-Fi network. Move around your home or office and see if the signal bars appear strong and consistent on your device's network connection indicator.
If you continue to experience Wi-Fi issues or face difficulties connecting to the extender, refer to the user manual of your specific D-Link model for troubleshooting steps or contact D-Link customer support for assistance.

The default admin password for the D-Link DAP-1620 is "admin".

To connect your D-Link DAP-1620 WiFi extender to your router without using WPS, you can follow these steps:
1. First, plug in the DAP-1620 extender into a power outlet near your router.
. Connect your computer or mobile device to the default WiFi network of the extender. The network name (SSID) should be "DAP-1620" or similar.
3. Open a web browser on your connected device and type "dlinkap.local" or "192.168.0.50" in the address bar. Press Enter.
4. You will be redirected to the D-Link setup wizard. If prompted, use the default username and password. The default username is "Admin" while the password field can be left blank.
5. Once inside the setup wizard, follow the on-screen instructions to configure the DAP-1620.
- Choose your preferred language.
- Click "Start" to begin the setup process.
- Select the WiFi network you want to extend from the list of available networks and click "Next".
- Enter the password for your existing WiFi network and click "Next".
- Set a unique SSID for your extended WiFi network or use the default name. Click "Next".
- Review the settings and click "Apply" to save the changes.
6. The extender will now apply the settings and reboot. This process may take a few minutes.
7. Once the reboot is complete, connect your computer or mobile device to the newly extended WiFi network using the SSID you set during the setup process.
8. Test the extended network to ensure it is working correctly.
By following these steps, you should be able to successfully connect your D-Link DAP-1620 WiFi extender to your router without utilizing the WPS feature.