Crosley CRUISER-DELUXE user manual

There could be several possible reasons for your Crosley record player not spinning. Here are a few common issues and their solutions:
1. Power source: Ensure that the record player is properly plugged into a functioning power outlet. Check if the power cord is securely connected to both the turntable and the outlet.
2. Belt issues: Some Crosley record players use a belt-driven mechanism to spin the turntable. If this belt is loose, slipped off, or broken, it can prevent the turntable from spinning. You may need to replace the belt.
3. Motor troubles: If the motor of the record player is not functioning properly, it will not spin the turntable. This could be due to a faulty motor, a loose wire connection, or other internal issues. In such cases, it may be necessary to contact the manufacturer for repairs or consider professional assistance.
4. Faulty switch or controls: Check if any of the switches or controls are incorrectly set or malfunctioning. Sometimes, the start/stop switch or speed selector switch can be the cause of the issue. Make sure they are set correctly and not stuck in between settings.
5. Dust or debris: Over time, dust, lint, or debris can accumulate inside the turntable mechanism. This can hinder the rotation of the turntable. Ensure your record player is clean and free from any obstructions. You can use a soft cloth or an anti-static brush to clean the turntable and its components.
If none of these troubleshooting steps resolve the issue, it's recommended to contact Crosley customer support or consult a professional technician for further assistance.

Yes, the Crosley Cruiser Deluxe has Bluetooth connectivity. It allows you to wirelessly connect your smartphone, tablet, or other Bluetooth-enabled devices to play music through the turntable's built-in speakers.

To reset your Crosley Cruiser-Deluxe record player, follow these steps:
1. Turn off the record player and unplug it from the power source.
. Remove the platter by gently lifting it straight up.
3. Locate the small lever or switch underneath the tonearm.
4. Move the lever or switch to the up or "reset" position.
5. Let the lever or switch stay in the reset position for a few seconds.
6. Move the lever or switch back to its original position.
7. Place the platter back on the turntable, ensuring it is aligned properly.
8. Plug the record player back into the power source.
9. Turn on the record player and test if the reset has been successful.
Note: This reset process may vary slightly depending on the specific model of your Crosley Cruiser-Deluxe record player.

To connect your Crosley Cruiser Deluxe turntable to external speakers, you have a few options:
1. Built-in speakers: The Crosley Cruiser Deluxe already has built-in speakers, so you can simply use them without any additional connections. Adjust the volume using the volume control on the turntable.
2. Wired connection: The turntable has a built-in RCA output jack at the back. You can use a set of RCA cables to connect it to an external speaker system or amplifier. Most speaker systems or amplifiers have RCA input jacks. Connect the red plug of the RCA cable to the right channel (red) output on the turntable, and the white plug to the left channel (white) output. Then, connect the other end of the RCA cable to the RCA input jacks on your speaker system or amplifier. Adjust the volume using the external speaker system or amplifier controls.
3. Bluetooth connection: If you have Bluetooth-enabled speakers, you can check if your Crosley Cruiser Deluxe model has a built-in Bluetooth transmitter. If it does, you can search for your speaker system's Bluetooth connection on the turntable and pair them. Refer to the user manual of your specific model for instructions on how to activate and pair Bluetooth devices.
Remember that the method of connecting external speakers may vary slightly depending on your model and the specific features available. Always consult your user manual for accurate and model-specific instructions.