Cateye VELO-7 user manual

To reset your Cateye Velo-7 speedometer, follow these steps:
1. Press and hold the "SET" button on the back of the speedometer for about 2 seconds. The display will show the settings menu.
. Use the "MODE" button to navigate through the settings menu until you reach the "Odo" (odometer) option.
3. Once you are on the "Odo" option, press and hold the "SET" button again for about 2 seconds. The display will show a confirmation message asking if you want to reset the odometer.
4. Use the "MODE" button to highlight the "Reset" option, and then press the "SET" button to confirm.
5. The odometer will be reset to zero, and the speedometer will return to the normal display mode.
Note: Be cautious while resetting the odometer as this action is irreversible, and all distance data will be permanently erased.

To change the tire size on a Cateye Velo 7 cycling computer, you need to follow these steps:
1. Press and hold the "SET" button on the back of the computer for a couple of seconds until the display shows the current wheel size.
2. Once the wheel size is displayed, press the "MODE" button on the front of the computer to enter the setting mode.
3. The current inches or millimeter setting will start flashing. Use the "SET" button to change the value to match your tire's diameter.
4. After selecting the correct tire size, press the "MODE" button again to move to the next setting.
5. Repeat steps 3 and 4 to adjust the second decimal place (if applicable) and confirm the settings.
6. Once you have verified and set all the wheel size settings, press and hold the "SET" button for a few seconds to exit the setting mode and save the changes.
By following these steps, you'll be able to change the tire size on your Cateye Velo 7 cycling computer to accurately measure your speed and distance.