Canon POWERSHOT-SD750 user manual

To turn on your Canon Powershot sd750, you simply need to press the power button located on the top of the camera next to the shutter button.

To charge a Canon IXUS 75 (also known as the Canon PowerShot SD750) camera, you need to follow these steps:
1. Make sure you have the provided battery charger and a compatible power adapter.
. Take the battery out of the camera.
3. Connect the battery charger to a power outlet.
4. Insert the battery into the charger. The side of the battery with the contacts should be facing down.
5. Plug one end of the power adapter into the charger and the other end into a power outlet.
6. The charger's indicator light will turn on to show that it is charging the battery.
7. Allow the battery to charge completely. The charging time may vary depending on the battery level and charger model.
8. Once the battery is fully charged, the charger's indicator light will turn off or change color to indicate that the charging is complete.
9. Disconnect the charger from the power outlet and remove the battery from the charger.
10. Insert the charged battery back into your Canon IXUS 75 camera.
Now your Canon IXUS 75 is ready to be used with the fully charged battery.

The Canon Powershot SD750, also known as the Canon Digital IXUS 75, was released in February 2007.

To turn on your Canon Powershot S80, follow these steps:
1. Locate the power button on your camera. It is usually located on the top or back of the camera, labeled with a power icon.
2. Press and hold the power button for a few seconds until the camera powers on. You should see the Canon logo appear on the screen.
3. Once the camera is powered on, you can start using it by adjusting the settings, focusing, and capturing photos or videos.
Note: If the camera does not turn on, make sure the battery is charged or insert a fully charged battery. If the battery is inserted correctly and the camera still doesn't turn on, you may need to contact customer support for further assistance.