Canon POWERSHOT-S5-IS user manual

The Canon PowerShot S5 IS has a range of shutter speeds from 15 seconds to 1/3200th of a second.

The Canon PowerShot S5 IS was released in the year 2007.

To turn on the flash on your Canon PowerShot S5 IS, follow these steps:
1. Turn on your camera by rotating the mode dial to any shooting mode.
2. Press the flash button, located on the left side of the camera's top panel, beneath the mode dial.
3. As you press the flash button, a menu will appear on the camera's LCD screen.
4. Navigate through the options using the left/right arrow buttons until you reach the desired flash mode. The available flash modes may include auto flash, fill flash, red-eye reduction, slow-sync, etc.
5. Once the desired flash mode is selected, press the "Set" button, which is located at the center of the navigation buttons.
Now, the flash is turned on, and you can start capturing photos with the flash activated.

To view pictures on your Canon PowerShot S5 IS, you can follow these steps:
1. Turn on your camera by pressing the power button located on the top of the camera.
. Use the mode selector dial on the top of the camera to set it to the Playback mode, typically represented by a square icon.
3. Look at the back of the camera and you will find a dedicated Playback button labeled "Play" or indicated by a right-pointing arrow in a rectangular box.
4. Press the Playback button once to display the most recent photo taken on the camera's LCD screen.
5. To view the next picture, you can press the right-arrow button on the circular control pad located on the back of the camera. Each time you press the right arrow, it will move to the next photo.
6. Similarly, if you want to view the previous photo, press the left-arrow button on the circular control pad.
7. You can zoom in or out on a picture by using the zoom lever located on the top right side of the camera. To zoom in, slide the zoom lever toward the "T" (telephoto) position, and to zoom out, slide it towards the "W" (wide-angle) position.
8. If you wish to view multiple images at once, press the "DISP" (Display) button located below the circular control pad to switch between different viewing modes. This button allows you to toggle between single image viewing and thumbnail grid viewing.
9. To exit the Playback mode, press the shutter button halfway down or turn off the camera using the power button.
These instructions should help you navigate through and view pictures on your Canon PowerShot S5 IS camera.