Canon POWERSHOT-A630 user manual

There could be several reasons why your PowerShot A630 camera is not turning on:
1. Battery Issues: Make sure the battery is properly inserted and charged. If the battery is old or damaged, it may not hold a charge and need to be replaced.
2. Memory Card Issue: If there is a problem with the memory card, the camera may not turn on. Try removing the memory card and turning on the camera without it to see if it powers on.
3. On/Off Button: Check if the on/off button is working properly. If it is stuck or not functioning correctly, it may prevent the camera from turning on.
4. Lens Error: If the lens is stuck or jammed, the camera may not power on. Try gently tapping or pushing the lens to see if it retracts or moves.
5. Physical Damage: If the camera has been dropped or exposed to water or extreme conditions, it may have suffered physical damage, which can prevent it from turning on. In such cases, professional repair may be required.
If none of these solutions work, it is recommended to contact Canon customer support or take the camera to a professional technician for further diagnosis and repair.

The Canon PowerShot A630 was made and released in the year 2006.

To turn on your Canon Powershot S80, follow these steps:
1. Locate the power button on your camera. It is usually located on the top or back of the camera, labeled with a power icon.
2. Press and hold the power button for a few seconds until the camera powers on. You should see the Canon logo appear on the screen.
3. Once the camera is powered on, you can start using it by adjusting the settings, focusing, and capturing photos or videos.
Note: If the camera does not turn on, make sure the battery is charged or insert a fully charged battery. If the battery is inserted correctly and the camera still doesn't turn on, you may need to contact customer support for further assistance.