Canon PIXMA-TS9020 user manual

To scan a document or photo on a Canon PIXMA TS9020 printer, you can follow these steps:
1. Ensure that your printer is powered on and connected to your computer or device.
2. Lift the scanner cover on top of the printer to reveal the scanning glass.
3. Place the document or photo you wish to scan face down on the scanning glass. Make sure it is aligned properly and fits within the marked scanning area.
4. Close the scanner cover gently.
5. On your computer or device, open the scanning software provided by Canon. If you don't have the software installed, you can download it from Canon's official website and install it.
6. From the scanning software, choose the appropriate scanning option. This can vary depending on your requirements, such as saving as a PDF, image, or sending to an email.
7. Configure the scanning settings, if necessary, including resolution, color or grayscale, file format, and destination folder.
8. Start the scan by clicking the "Scan" or "Start" button in the software. The printer will then begin scanning the document or photo.
9. Once the scan is complete, the scanned image will be saved according to your settings. You can then view or edit the scanned file on your computer or device.
Please note that the exact steps and options may vary slightly depending on the scanning software and operating system you are using. It's recommended to refer to the user manual or documentation provided with your Canon PIXMA TS9020 printer for more detailed instructions on scanning procedures specific to your printer model.

The Canon TS9000 series printers, including the Canon PIXMA TS9020, do not have a default password set by the manufacturer. However, if you are referring to the printer's Wi-Fi network password, it is usually located on a sticker on the printer or in the printer's documentation.

To connect your Canon PIXMA TS9020 printer to a Wi-Fi network, please follow the steps below:
1. Ensure that your printer is plugged in and turned on.
. On the printer's control panel, press the "Home" button.
3. Use the arrow keys to navigate to the "Network" menu, then press the "OK" button.
4. Navigate to "Wi-Fi" and press "OK."
5. Select "Wireless LAN Setup" and press "OK."
6. Select "Easy Wi-Fi Setup" and press "OK."
7. The printer will search for available Wi-Fi networks. Once the search is complete, select your network from the list and press "OK."
8. If your network is password-protected, enter the Wi-Fi password using the printer's on-screen keyboard, then press "OK."
9. After entering the password, the printer will connect to the Wi-Fi network. You will see a message confirming the successful connection.
10. Press the "OK" button to complete the Wi-Fi setup process.
Your Canon PIXMA TS9020 printer should now be connected to your Wi-Fi network. You can verify the connection by printing a network configuration page or performing a test print.