Canon PIXMA-TS5350 user manual

To manually connect your Canon printer to your computer, follow these steps:
1. Ensure that your printer is properly set up and turned on.
. Check if your printer has a USB cable. If not, you may need to purchase one.
3. Find an available USB port on your computer. It is typically located on the front or back of the computer.
4. Take one end of the USB cable and insert it into the USB port on your computer.
5. Take the other end of the USB cable and connect it to the USB port on your printer.
6. Once connected, your computer should detect the printer automatically and install the necessary drivers.
7. If the drivers are not installed automatically, you can download them from the Canon website using your printer model number.
8. Once the drivers are installed, your printer should be successfully connected to your computer.
Note: Depending on your printer model and computer OS, the exact steps may vary slightly. It is always recommended to refer to the user manual or Canon support website for specific instructions.

To scan wirelessly from your Canon printer to your computer, you can follow these steps:
1. Ensure that your Canon printer is connected to the same Wi-Fi network as your computer.
2. Install the necessary software/drivers for your Canon printer on your computer. You can download the latest drivers from the Canon official website specific to your printer model.
3. Open the software provided by Canon, commonly known as "Canon IJ Scan Utility" or similar, on your computer.
4. Place the document or photo you want to scan on the scanner glass or in the Automatic Document Feeder (ADF) of your Canon printer.
5. On your computer, launch the Canon scanning software. It will usually detect your printer's presence automatically. If not, search for the printer and select it.
6. Choose the type of scan you want to perform (e.g., document, photo, etc.) and select any desired settings such as resolution, color, file format, etc.
7. Once the settings are configured, click on the "Scan" or "Start" button in the scanning software.
8. The Canon printer will start scanning the document or photo wirelessly and will send it directly to your computer.
9. When the scanning process is complete, the scanned file will usually be saved in the default destination folder on your computer. You can also specify the location where you want to save the scanned file, if desired.
Note: The exact steps may vary slightly depending on the model and software version of your Canon printer. Make sure to consult the user manual or Canon's support website for specific instructions related to your printer model.