Canon PIXMA-TS3320 user manual

To connect your Canon printer to Wi-Fi, follow these steps:
1. Ensure that your printer is turned on and in a ready state.
2. Press the Wi-Fi button on your printer (the button may also have a wireless icon or label). Hold it until the Wi-Fi indicator starts flashing.
3. On your computer or mobile device, go to the Wi-Fi settings and select the network with the same name as your printer. It will be named "Canon" followed by a series of alphanumeric characters.
4. Once connected to the printer's network, open a web browser and type "http://canon.com/ijsetup" or "http://192.168.1.1" in the address bar. Hit Enter.
5. You will be redirected to the Canon printer setup page. Choose your region and model number from the dropdown menus, then click on the "Download" button.
6. Download and run the setup file. Follow the on-screen instructions to install the necessary drivers and software.
7. During the installation process, you will be prompted to choose the connection type. Select "Wireless Connection" or "Wi-Fi Connection." The installer will search for your printer on the network.
8. When the printer is detected, select it from the list and click "Next" to complete the setup.
After completing these steps, your Canon printer should be connected to the Wi-Fi network. You can now print wirelessly from any device on the same network as the printer.

To manually connect your Canon printer to your computer, follow these steps:
1. Ensure that your printer is properly set up and turned on.
. Check if your printer has a USB cable. If not, you may need to purchase one.
3. Find an available USB port on your computer. It is typically located on the front or back of the computer.
4. Take one end of the USB cable and insert it into the USB port on your computer.
5. Take the other end of the USB cable and connect it to the USB port on your printer.
6. Once connected, your computer should detect the printer automatically and install the necessary drivers.
7. If the drivers are not installed automatically, you can download them from the Canon website using your printer model number.
8. Once the drivers are installed, your printer should be successfully connected to your computer.
Note: Depending on your printer model and computer OS, the exact steps may vary slightly. It is always recommended to refer to the user manual or Canon support website for specific instructions.

There could be several possible reasons why your Canon TS3300 printer is not printing. Here are a few troubleshooting steps you can try:
1. Check ink cartridges: Ensure that the ink cartridges are properly installed and have enough ink. If the ink levels are low, replace the cartridges.
2. Paper jams: Make sure there are no paper jams or obstructions in the paper tray, output tray, or any other parts of the printer. Clear any paper jams if necessary.
3. Connectivity: Check the connection between your printer and the computer. Ensure that the USB or wireless connection is securely plugged in and properly set up. Restart both the printer and the computer to refresh the connection.
4. Printer queue: Sometimes, print jobs can get stuck in the print queue, causing the printer to appear unresponsive. Clear the print queue and try printing again.
5. Driver issues: Make sure you have the latest printer drivers installed on your computer. Visit the Canon website and download the appropriate drivers for your printer model. Install them and restart your computer before attempting to print again.
6. Power cycle: Turn off the printer, unplug it from the power source, wait for a few minutes, and then plug it back in. Turn on the printer and check if it prints now.
If these steps do not resolve the issue, it is recommended to consult the Canon support website or contact their customer support for further assistance.