Canon PIXMA-MG7120 user manual

If you have lost the CD that comes with your Canon Pixma printer, you still can install the printer by downloading the correct drivers from the Canon website.
Here's how you do it:
1. Power on your Canon Pixma printer and connect it to your computer via USB.
2. Go to the Canon Support website (www.canon.com/support).
3. You'll see a search bar asking you to "Enter a model". Type your Canon Pixma printer model. Then, either press Enter or click the likely-looking model number that appears below the search bar.
4. It will take you to the product page of your printer model. Look for 'Drivers & Downloads' section usually on the right-hand side.
5. Under ‘Drivers & Downloads’, choose the operating system you are using on your computer (like Windows 10, Mac OS, etc).
6. In the list of files that appears, find the proper driver file for your operating system. It might be labeled something like "Driver" or "Printer Driver". Click on the 'Select' button beside it and then click 'Download'.
7. Wait for the file to download and then locate it in your downloads folder. Double click on the file to open it.
8. Follow the steps in the installation wizard. Agree to any terms and conditions, choose the 'Install' option, and keep clicking 'Next' until the installation is complete.
9. Restart your computer. Once your computer has restarted, your printer should be ready to use!
Note: You’ll need to be connected to the internet to download the driver.
In case your computer doesn't recognize the printer, you’ll have to go to the 'Control Panel' located in the 'Settings' of your computer, then click on 'Printers' or 'Devices and Printers', click 'Add a Printer' and follow the instructions to install it.

To connect your Canon Pixma printer to Wi-Fi, you can follow these steps:
1. Power on your printer and ensure it is placed within the range of your Wi-Fi network.
2. On the printer's control panel, navigate to the Wi-Fi setup menu. This can vary depending on the specific model of your Canon Pixma printer.
3. Within the Wi-Fi setup menu, select the option to connect to a wireless network.
4. The printer will scan and display a list of available Wi-Fi networks. Locate and select your Wi-Fi network from the list.
5. If your Wi-Fi network requires a password, enter the password using the printer's control panel. Use the navigation and selection buttons to input the password accurately.
6. After entering the password, select the option to connect to the Wi-Fi network.
7. Allow some time for the printer to establish the connection. Once connected, the Wi-Fi indicator on the printer's control panel will stop flashing and remain steady.
8. To confirm that your printer is connected to Wi-Fi, you can print a wireless network test report. This option is usually available within the Wi-Fi setup menu.
Once your Canon Pixma printer is connected to Wi-Fi, you can proceed to print wirelessly from devices on the same network.

To connect your Canon MG7120 printer to Wi-Fi, you can follow the steps below:
1. Make sure your printer is turned on.
. Press the "Menu" button on your printer's control panel.
3. Use the arrow keys to navigate to the "Wireless LAN Setup" menu and press the "OK" button.
4. Select "Easy setup" and press "OK".
5. Choose your Wi-Fi network from the list of available networks and press "OK".
6. If prompted, enter your Wi-Fi password using the printer's number pad and press "OK".
7. Wait for the printer to connect to your Wi-Fi network, which may take a few moments.
8. Once connected, the printer will display "Connected to the access point" on its screen.
Your Canon MG7120 printer is now connected to Wi-Fi, and you should be able to print wirelessly from any connected device on the same network.