Canon PIXMA-MG6650 user manual

To connect your Canon Pixma MG6650 printer, you can follow these step-by-step instructions:
1. Ensure that your printer is turned on and in a ready state.
2. On your computer, go to the Wi-Fi settings and make sure you are connected to the same Wi-Fi network that you want your printer to connect to.
3. On the printer's control panel, press the "Home" button.
4. Use the arrow buttons to navigate to the "Setup" icon and then press the "OK" button.
5. Navigate to the "Device settings" option and press "OK".
6. Select "LAN settings" and press "OK".
7. Choose the "Wireless LAN setup" option and press "OK".
8. Select the Wi-Fi network from the available options and press "OK".
9. If prompted, enter the Wi-Fi network password using the printer's control panel.
10. Once the connection is established, your printer will display a message confirming the successful connection.
11. Now, on your computer, open a document or image you want to print.
12. Select "Print" from the software/application's File menu.
13. Choose your Canon Pixma MG6650 printer from the list of available printers.
14. Adjust any print settings if needed, such as paper size and print quality.
15. Click "Print" to send the print job to your printer.
Your Canon Pixma MG6650 printer should now be successfully connected to your computer, and you should be able to print documents or images wirelessly.

To connect your Canon PIXMA MG6650 printer to Wi-Fi, follow these steps:
1. Turn on your printer and ensure that it is in the ready state.
. Press the "Home" button on the printer's control panel.
3. Use the navigation buttons to select "Wireless LAN setup" and press "OK".
4. Select "Easy setup" and press "OK".
5. The printer will search for available Wi-Fi networks. Select your Wi-Fi network from the list and press "OK".
6. Enter the Wi-Fi password if prompted and press "OK".
7. The printer will attempt to connect to your Wi-Fi network. Once connected, the Wi-Fi light on the printer will stop flashing and remain lit.
8. To verify the connection, you can print a wireless LAN setup report by pressing and holding the "Resume/Cancel" button until the orange light flashes six times, then release it.
Your Canon PIXMA MG6650 printer should now be successfully connected to your Wi-Fi network and ready to use wirelessly.

There could be several reasons why your Canon Pixma printer is not working. Here are a few common issues and their potential solutions:
1. Connectivity issue: Ensure that your printer is properly connected to the power source and that all cables are securely plugged in. If you are using a wireless printer, check that it is connected to the correct Wi-Fi network.
2. Paper jam: Open the printer cover and check for any paper jammed inside. If you find any, gently remove it to clear the jam. Make sure to follow the printer's manual for proper paper handling.
3. Low ink or empty cartridges: Check if your ink levels are low or if any cartridges are empty. Replace or refill the cartridges as needed.
4. Driver problems: Make sure that you have the latest printer drivers installed on your computer. Visit the Canon website and download the appropriate drivers for your printer model.
5. Printer not detected: Try restarting both your printer and computer. Ensure that the printer is set as the default printer on your computer's settings.
6. Offline status: Check if your printer is set to offline mode. Go to your computer's printer settings and change the status to online.
If none of these solutions fix the issue, you may need to consult the printer's manual or contact Canon's customer support for further assistance.