Canon PIXMA-MG5650 user manual

Here's how you can set up your Canon PIXMA MG5650 printer:
1. Take the MG5650 Printer out of the box and remove all the packaging materials.
2. Plug the printer in and turn it on. You will have to attach the plug to your printer and then connect it to a power source. Press the power button to turn the printer on.
3. Insert the ink cartridges. Open the front panel of the printer and insert the ink cartridges properly. Make sure you insert the right ink cartridges on the right slots.
4. Load the printer with paper. Pull out the paper tray from the bottom of the printer and place your paper inside. Make sure to adjust the paper guides properly to avoid any printing problems.
5. Install the printer software and drivers. Use the CD that came with your printer and follow the instructions on the screen. If you no longer have the CD, you can download the software from the Canon website. Select the right operating system and download the necessary files.
6. Connect your printer to your computer. Your printer can be connected either using a USB cable or via WiFi. If you're using a USB cable, simply plug one end into your printer and the other into your computer. If you're using WiFi, make sure your printer and your computer are connected to the same network. From your printer's screen, navigate to the settings, select the WiFi setup and follow the instructions.
7. Install printer on your device. On your computer, go to the Control Panel, go to “Devices and Printers,” and select “Add a Printer.” Follow the prompts until your printer is installed.
8. Test print. Once everything is set up, you can test your printer by printing any document.
Remember to register your printer online for further support and updates from Canon.

To connect your Canon PIXMA MG5650 printer to Wi-Fi, follow these steps:
1. Ensure that your printer is turned on and in a ready state.
. Press the "Setup" button on the printer's control panel. It looks like a gear icon.
3. Use the arrow buttons to navigate to the "Wireless LAN Setup" option and press the "OK" button.
4. Select "Easy Setup" and then press "OK" to start the wireless setup process.
5. Choose your Wi-Fi network from the list of available networks and press "OK".
6. If your network is secured with a password, enter it using the alphanumeric keypad on the printer's control panel. Use the arrow buttons to navigate between characters and press "OK" when finished.
7. Confirm the network settings by pressing the "OK" button.
8. The printer will attempt to connect to your Wi-Fi network. Once it successfully connects, the Wi-Fi light on the printer should stop flashing and remain lit.
9. To verify the wireless connection, you can print a network configuration page. Press the "Home" button on the printer's control panel, navigate to "Setup", then "Device Settings", and finally select "Print LAN Details".
Your Canon MG5650 printer is now connected to your Wi-Fi network, and you can print wirelessly from your computer or other devices on the same network.

To scan a document on your Canon Pixma MG5650, follow these steps:
1. Make sure your printer is turned on and connected to your computer via USB or Wi-Fi.
2. Place the document you want to scan face-down on the scanner glass or in the Automatic Document Feeder (ADF) if your printer model has one.
3. On your computer, open the Canon IJ Scan Utility program. If you don't have it installed, you can download it from the Canon website and install it.
4. Once the IJ Scan Utility is open, you should see several scanning options. Choose the type of scan you want (e.g., "Auto Scan," "Document Scan," or "Photo Scan").
5. Select your desired settings for the scan, such as resolution, color mode, or file format. These settings will vary depending on your specific requirements. You can also choose a save location for the scanned document.
6. Click on the "Scan" button to start scanning. The scanning process may take some time depending on the size of the document and your chosen settings.
7. Once the scan is complete, the scanned document will be saved to the specified location on your computer. You can now access and use the scanned file.
Note: The steps mentioned here are based on the Canon IJ Scan Utility software. However, some Canon printers may have a different scanning software or interface. In such cases, refer to the printer's user manual for specific instructions on how to scan.

To scan with your Canon PIXMA MG5650 printer, you can follow these steps:
1. Ensure that your printer is turned on and connected to your computer or network.
. Place the document or photo you want to scan on the scanner glass or in the Automatic Document Feeder (ADF) if your printer has one.
3. On your computer, open the Canon IJ Scan Utility software. You can usually find this application in the Start menu or by searching for it.
4. Once the Scan Utility window opens, you will see various scanning options. Choose the type of scan you want, such as "Auto Scan," "Document," "Photo," or "Custom."
5. Configure any additional scan settings such as resolution, color mode, file format, etc. These options may vary depending on your printer model and the software version you have installed.
6. Click on the "Scan" button to start the scanning process. If you placed a document in the ADF, make sure it is properly loaded, and the scanner lid is closed.
7. Wait for the scan to complete. The scanned image will be displayed on your computer screen.
8. If you need to save the scanned image, click the "Save" button and choose the desired location on your computer to save the file.
9. Once the file is saved, you can access it using any image editing or viewing software.
That's it! You have successfully scanned a document or photo with your Canon PIXMA MG5650 printer.