Canon PIXMA-MG5220 user manual

There could be several reasons why your Canon PIXMA-MG5220 printer will not switch on:
1. Power Cord: Start by checking if the power cord is firmly plugged into the printer and the wall outlet. Sometimes, a loosened power cord may interrupt the power supply that stops the device from turning on.
2. Power Outage: There may be an issue with your power supply. You can verify this by plugging another electronic device into the same outlet to see if it works.
3. Faulty Outlet: The socket you are using could be faulty. Try plugging the printer into a different outlet.
4. Printer's Power Button: There might be some damage to your printer's power button.
5. Internal Issues: There could be a serious internal issue with your printer, such as a failure in circuit, which requires professional help.
6. Dead Battery: If your printer is battery-powered, the battery might be dead or weak. You will need to replace the battery in this case.
If you’re still having problems, it is recommended to contact Canon's customer service or a professional for further assistance.

There could be several reasons why your Canon PIXMA MG5220 printer suddenly stopped working. Here are some common issues that may cause printer problems:
1. Connectivity issues: Ensure that your printer is properly connected to the power supply and to your computer or network. Check if the cables are securely plugged in and that there are no loose connections.
2. Paper jams: Paper jams are a common occurrence in printers. Open up the printer and check if there are any jammed sheets of paper. Clear the paper path and ensure no small pieces of paper are stuck.
3. Empty ink cartridges: If your ink cartridges are empty or low on ink, the printer may not be able to print. Check the ink levels through the printer software or on the printer display, and replace any empty cartridges.
4. Driver issues: Sometimes, outdated or incompatible printer drivers can cause printing problems. Make sure you have the latest Canon printer drivers installed on your computer. You can download them from the Canon website.
5. Printer queue issues: When too many print jobs are stuck in the print queue, it can cause the printer to stop responding. Clear the print queue on your computer and restart both your computer and printer.
6. Faulty hardware: In some cases, there may be a hardware malfunction or a component failure within the printer. If you have tried all the troubleshooting steps and the printer still doesn't work, it might require professional assistance or repairs.
If none of these solutions work, it is best to reach out to Canon support or a printer technician for further assistance.

To connect your Canon Pixma printer to Wi-Fi, you can follow these steps:
1. Power on your printer and ensure it is placed within the range of your Wi-Fi network.
2. On the printer's control panel, navigate to the Wi-Fi setup menu. This can vary depending on the specific model of your Canon Pixma printer.
3. Within the Wi-Fi setup menu, select the option to connect to a wireless network.
4. The printer will scan and display a list of available Wi-Fi networks. Locate and select your Wi-Fi network from the list.
5. If your Wi-Fi network requires a password, enter the password using the printer's control panel. Use the navigation and selection buttons to input the password accurately.
6. After entering the password, select the option to connect to the Wi-Fi network.
7. Allow some time for the printer to establish the connection. Once connected, the Wi-Fi indicator on the printer's control panel will stop flashing and remain steady.
8. To confirm that your printer is connected to Wi-Fi, you can print a wireless network test report. This option is usually available within the Wi-Fi setup menu.
Once your Canon Pixma printer is connected to Wi-Fi, you can proceed to print wirelessly from devices on the same network.