Canon PIXMA-MG3650S user manual

The flashing warning light on your Canon MG3650 printer typically indicates an error or issue that needs attention. In the case of a flashing warning light twice, it is usually associated with a paper jam or a paper feed error. Here's what you can do to resolve the issue:
1. Check for paper jams: Turn off the printer and open all access panels including the front tray and rear panel. Look for any stuck paper or debris that may be causing the jam. Gently remove the paper if possible, following the instructions provided in the printer's user manual.
2. Clear paper feed error: Ensure that the paper in the tray is properly loaded and not exceeding the recommended paper capacity. Adjust the paper guides to align correctly with the width of the paper. Make sure there are no folds, creases, or obstructions in the paper path.
3. Restart your printer: After clearing any paper jams or feed errors, turn off the printer, unplug it from the power source, and wait for a few minutes. Then, plug it back in and turn it on. This will reset the printer and clear any temporary errors.
4. Test your printer: Load a few sheets of plain paper into the paper tray and try printing a test page to check if the issue is resolved. If the warning light continues to flash or if you encounter any other error messages, refer to the printer's user manual or contact Canon's customer support for further assistance.
It's important to note that the specific cause and troubleshooting steps may vary depending on your printer model. Consulting the printer's user manual or contacting Canon's customer support will provide you with the most accurate and detailed instructions for your specific printer.

The Canon mg3600 printer has various lights that indicate different statuses. Here are the meanings of the most common lights:
1. Power Lamp (green): This light indicates whether the printer is turned on or off. A solid green light means the printer is on, while an off light means it is turned off.
2. Alarm Lamp (orange): This light usually blinks when an error or issue occurs. Check the printer's display or computer screen for a corresponding error message. The number of flashes can indicate specific error codes.
3. Wi-Fi Lamp (blue): The blue light indicates the status of the wireless connection. When it is lit, it means the printer is connected to a Wi-Fi network. If it blinks, it means the printer is trying to connect, and if it is off, there is no active Wi-Fi connection.
4. Ink Lamp (varies): The ink lamp, either black or color, indicates the ink level of the corresponding cartridge. A solid light means the ink is sufficient, while a flashing light indicates low ink. If the lamp is off, it means the cartridge is either empty or not installed.
5. Paper Lamp (orange): This light indicates if there is a paper jam or if the printer is out of paper. Check for any paper jams or add more paper to resolve the issue.
Note: The specific lights and their meanings may vary slightly depending on the model of the Canon mg3600 printer you have.

To connect your Canon Pixma MG3600 printer to your laptop, follow these steps:
1. Make sure your printer is turned on and the Wi-Fi lamp is flashing.
. On your laptop, go to your Wi-Fi settings and search for available networks.
3. Look for the network name starting with "Canon_ij_XXXX".
4. Select and connect to this network.
5. Once connected, open a web browser on your laptop.
6. In the browser's address bar, type "http://192.168.1.1" and press Enter.
7. The Canon printer setup page will open.
8. Click on 'Wireless LAN Setup' and then choose 'Wireless LAN Setup Wizard'.
9. Follow the instructions on the setup wizard to select your wireless network and enter your Wi-Fi password.
10. After completing the setup, your printer will be connected to your laptop through Wi-Fi.
Now you can print from your laptop to the Canon Pixma MG3600 printer.