Canon IXUS-285-HS user manual

To change the image size on your Canon IXUS 285 HS camera, follow these steps:
1. Turn on your camera and navigate to the shooting mode by pressing the "Mode" button.
. Use the arrow buttons or the rotary dial to select "Menu" on the screen.
3. Navigate to the "Image Quality" or "Image Size" option in the menu using the arrow buttons or rotary dial.
4. Press the "Set" button in the center of the arrow buttons or the rotary dial to enter the image quality settings.
5. Now, select the desired image size option. You may see options like Large, Medium, Small, etc.
6. Once you've selected the desired size, press the "Set" button to confirm your selection.
7. Exit the menu by pressing the "Menu" button again or halfway pressing the shutter button.
After following these steps, your Canon IXUS camera will capture images in the selected size. Please note that changing the image size can impact the file size and image quality.

To turn on your Canon IXUS camera, follow these steps:
1. Ensure the battery is charged and inserted correctly into the camera.
. Locate the power button on the camera. On most models, it is a small button usually located on top or the back of the camera.
3. Press and hold the power button for a couple of seconds until the camera turns on. You may see the Canon logo or a welcome screen displayed on the LCD screen.
4. Once powered on, the camera is ready to use. You can adjust settings, take photos, or record videos as needed.
If your camera does not turn on even after following these steps, make sure the battery is fully charged or try using a different battery if available. If the issue persists, consult the camera's user manual or consider contacting Canon customer support for further assistance.

The Canon IXUS 285 HS has a maximum resolution of 20.2 megapixels.