Canon EOS-REBEL-T3I user manual

The Canon EOS Rebel T3i was released in March 2011.

Yes, the Canon EOS Rebel T3i (also known as the Canon EOS 600D) has been discontinued by Canon. It was first released in 2011 and has since been replaced by newer models in Canon's Rebel series.

To change settings on your Canon Rebel T3i, follow these steps:
1. Power on the camera: Turn the power switch located on the top right-hand side of the camera to the "On" position.
2. Access the shooting mode: The camera defaults to the "Scene Intelligent Auto" shooting mode when turned on. To access other shooting modes, turn the mode dial located on the top left-hand side of the camera to the desired mode. The available modes include:
- Program (P): Camera automatically sets aperture and shutter speed, but you can adjust other settings.
- Shutter Priority (Tv): You set the desired shutter speed, and the camera selects the appropriate aperture.
- Aperture Priority (Av): You set the desired aperture, and the camera selects the appropriate shutter speed.
- Manual (M): Full control over aperture, shutter speed, and other settings.
- Creative Auto (CA): Semi-automatic mode with simplified settings for beginners.
- Portrait, Landscape, Close-up, Sports, Night Portrait, and Flash Off modes: Pre-optimized settings for specific scenarios.
3. Access the settings menu: Press the "Menu" button located on the back of the camera.
4. Navigate the menu: Use the directional buttons (arrow keys) on the back of the camera to navigate through the menu options.
5. Adjust settings: Once in a specific menu option, use the directional buttons to select the desired setting. Use the main control dial located next to the shutter release button to change the value of the selected setting.
6. Customize settings: The camera offers a wide range of customizable options. Look for the "Custom Functions" or "Custom Key Settings" menus to configure these settings according to your preferences.
7. Saving settings: After adjusting the desired settings, use the "Set" button located at the center of the directional buttons to apply or save the changes.
Note: The specific available settings and menu options may vary slightly depending on your camera's firmware version. Reference your camera's user manual for detailed instructions and to explore additional features and settings.