Brother XL-5130 user manual

There could be several reasons why the needle won't move on your Brother XL-5130 sewing machine:
1. Thread Jam: A common issue that can stop the needle from moving is a thread jam. This could be in the bobbin case or on the uptake mechanism.
2. Belt Problem: There could be an issue with the belt inside the machine. If the belt is broken or has slipped off its track, it won't turn the needle.
3. Needle Position: If the needle is not set properly, it won't be able to move. Make sure it's in the correct position by consulting the sewing machine's manual.
4. Incorrect Threading: If the machine is incorrectly threaded, it can cause the needle not to move.
5. Motor Issue: This could be a motor issue, where the motor has worn out or is not working properly.
It's best to consult the instruction manual or contact Brother's customer service for help. Or take the machine to a repair service if you are unable to solve the issue yourself.

There could be several reasons why your Brother XL-5130 sewing machine is threaded but not stitching. Here are a few potential causes:
1. Incorrect threading: Ensure that the top thread is threaded correctly through all the required guides, tension disks, and the needle. Also, make sure that the bobbin thread is correctly wound and inserted into the bobbin case.
2. Bobbin issues: Check if the bobbin is inserted correctly and rotating smoothly in the bobbin case. Ensure that it is threaded properly, and the bobbin tension is adjusted correctly.
3. Tension settings: Improper tension settings can also cause stitching issues. Make sure the machine is set to the correct thread tension for the type of fabric you are using. Incorrect tension can result in loose or tight stitches or no stitching at all.
4. Needle problems: A damaged, bent, or dull needle can affect the stitching process. Replace the needle if necessary, making sure it is properly inserted and facing the correct direction.
5. Machine maintenance: Regular cleaning and oiling of the machine can prevent thread jams and other issues. Make sure your machine is clean and properly maintained.
If none of these troubleshooting steps resolves the issue, it may be best to consult the user manual for your specific sewing machine model or contact a sewing machine technician for further assistance.

There could be several reasons why your Brother XL-5130 sewing machine is creating loops underneath the fabric. Here are a few possible causes:
1. Improper threading: Ensure that you have threaded the machine correctly, following the threading guide provided in the instruction manual. Make sure the presser foot is raised when threading.
2. Tension issues: Incorrect tension settings can cause looping. Check the upper thread tension by setting it to around 4 or 5 and make sure the bobbin thread is properly tensioned as well. Adjust the tension as needed.
3. Needle issues: A dull or bent needle can cause looping. Make sure the needle is inserted correctly and fully tightened. Also, ensure that you are using a suitable needle for the fabric you are sewing.
4. Bobbin problems: Ensure that the bobbin is correctly inserted into the bobbin case and that the case is properly inserted into the machine. Make sure the bobbin thread is correctly threaded through the bobbin tension spring.
5. Incorrect machine settings: Check the stitch length and width settings to ensure they are appropriate for your fabric and desired stitch. Also, check if any stitch options, like needle position or stitch pattern, are causing the looping.
If the problem persists after checking these possible causes, consult the instruction manual or reach out to a Brother sewing machine technician for assistance.