Brother PT-H100R user manual

To reset your P-Touch Brother label maker, you can follow these steps:
1. Ensure the label maker is turned on and remove any tape cassettes from the machine.
. Press and hold down the "Power" button until the machine turns off.
3. While holding down the "Power" button, plug in the power cord to turn the machine back on.
4. Continue holding the "Power" button for about 5 seconds until the machine beeps and displays "Factory Reset" on the screen.
5. Release the "Power" button and wait for the machine to reset.
6. Once the reset is complete, the label maker will power back on and display the default settings.
7. You may need to go through the initial setup process again, which involves setting the language, date/time, and any other required settings.
Note that performing a factory reset will erase any saved settings and data on the label maker, so be sure to back up any important information or settings before doing a reset.

To use symbols with the Brother P-Touch PT-H100R label maker, follow these steps:
1. Turn on the label maker by pressing the power button.
. Use the arrow keys to navigate and select the desired symbol category from the main menu. Categories may include punctuation, currency, arrows, shapes, or other symbols.
3. Once you've selected a category, a list of symbols within that category will appear on the screen. Use the arrow keys to scroll through the symbols.
4. When you find the symbol you want to use, press the "OK" or "Enter" button to select it.
5. The selected symbol will appear on the display screen. Use the arrow keys to position the symbol where you want it to be printed on the label.
6. After positioning the symbol, press the "OK" or "Enter" button again to confirm its placement.
7. Now, you can continue entering text or add additional symbols as needed. Repeat the above steps to insert more symbols.
8. Once you've finished creating your label with symbols, press the "Print" button to print it out.
9. Make sure you have the appropriate label tape loaded in the label maker before printing.
Remember to consult the user manual for your specific model, as the steps above may vary slightly depending on your P-Touch model.

To install a Brother P-Touch printer like PT-H100R, follow the steps below:
1. Unbox and connect the printer: Start by unboxing the printer and removing all the packaging materials. Then, connect the printer to your computer using the USB cable. Ensure that the printer is connected to a power source as well.
2. Install printer drivers: Visit the Brother website (www.brother.com) and navigate to the "Support & Downloads" section. Enter your printer model (PT-H100R) and select your operating system. Download the appropriate driver for your system and save it to your computer.
3. Run the driver installation: Locate the driver file you just downloaded and run it. Follow the on-screen instructions to install the printer drivers on your computer. This will enable your computer to communicate with the printer.
4. Connect to your software: If you have any labeling software such as Brother P-Touch Editor, Brother P-Touch Editor Lite, or P-Touch Editor 5.1, install them as well. These software tools allow you to create and customize labels for printing.
5. Test the printer: After the drivers and software are installed, you can test the printer by opening a document or label design in your chosen software. Select the PT-H100R printer as your printing device and try printing a sample label.
6. Customize printer settings (optional): To personalize your printer settings, you can access the printer properties through the "Printers & Scanners" option in the Control Panel (Windows) or System Preferences (Mac). From there, you can adjust settings such as label length, label margins, and label colors.
Note: If you encounter any issues during the installation process, refer to the printer's user manual or visit the Brother support website for troubleshooting steps specific to your model.

To change the font size on a Brother P-Touch label maker (model PT-H100R), you can follow these steps:
1. Turn on the label maker by pressing the power button.
. Press the "Code" button, followed by the up arrow button or down arrow button to select the desired font size option.
3. Once the desired font size is selected, press the "Enter" button to confirm the selection.
Note: The available font sizes may vary depending on the specific model of the Brother P-Touch label maker you have.