Brother P-TOUCH-PT-80 user manual

There could be several reasons why your Brother label maker is not printing. Here are some possible causes and solutions:
1. Check that the label maker has enough battery or power. If it is running on batteries, make sure they are charged or replace them with new batteries. If it is plugged into a power source, ensure that the power connection is secure and the outlet is functioning properly.
2. Verify that the label cassette is installed correctly. Open the label compartment, remove the cassette, and reinsert it, ensuring it is properly lined up and clicked into place.
3. Make sure the labels in the cassette are aligned properly. Ensure that the labels are loaded straight and not skewed or misaligned. Adjust the label alignment guides if necessary.
4. Check the print head and clean it if needed. Over time, the print head can accumulate dust or debris, which may hinder its performance. Use a soft lint-free cloth or a cotton swab dipped in rubbing alcohol to gently clean the print head.
5. Verify that the label maker is not in sleep or standby mode. Press the power button or any other relevant button to wake it up from sleep mode.
6. Ensure that you have selected the correct label design, font, size, or other formatting options. Review the settings on the label maker's display screen to ensure they are set correctly.
7. Try resetting the label maker. Look for the reset button or check the user manual to find the appropriate steps for resetting your specific model.
8. If none of the above steps work, it's possible that your label maker may have a malfunction or a hardware issue. Contact Brother's customer support or take it to an authorized service center for further assistance.

Printing two lines on a Brother P-Touch label maker involves several steps. Here' how to do it:
1. Turn on your Brother P-Touch label maker.
. Press the key labeled "Size" repeatedly until the screen displays the size you want to use for your two-line text.
3. Now press the "Caps" or "Shift" key and start typing your first line of text. Once you finish the first line, press the "Enter" key to go to the next line.
4. Type your second line of text and then press the "Ok" or "Enter" button.
5. You can preview the lines of text on your screen. If you are happy with them, press the "Print" button to print the label.
6. If you have any mistakes or want to edit, use the "Backspace" or "Delete" buttons to edit and then press "Print" again.
Remember, you can only print two lines on a Brother P-Touch label maker if the tape width is at least 3.5mm. Otherwise, it won't fit.

To change the font size on your Brother P-Touch PT-80 label maker, follow these steps:
1. Turn on your label maker by pressing the Power button.
. Press the Font/Size button on the top of the label maker to enter the Font/Size settings.
3. Use the arrow keys (up and down) to select the desired font size from the available options. The available sizes could vary depending on the model, but it typically ranges from Small, Medium, Large, to Extra Large.
4. Press the OK or Enter button to confirm the selected font size and apply it to your labels.
5. Start creating labels with the new font size by entering the desired text using the keypad and pressing the Print button.
Note: Refer to your Brother P-Touch PT-80 user manual for specific instructions and additional features of your label maker model.

There could be several reasons why your Brother P-touch label maker is not working. Here are some troubleshooting steps you can try:
1. Check the power source: Ensure that the label maker is properly connected to a power source or that the batteries have enough charge.
2. Check the tape cassette: Make sure that the tape cassette is inserted correctly and that it is compatible with your label maker model.
3. Clean the print head: Over time, debris or adhesive residue may build up on the print head, causing issues with print quality. Use a soft, lint-free cloth or a label cleaner to gently clean the print head.
4. Check the settings: Make sure that the label maker is set to the correct language, font size, and other settings that might affect printing.
5. Reset the label maker: If the issue persists, try resetting the device. Refer to the user manual or the manufacturer's website for instructions specific to your model.
6. Update the firmware: Check if there are any firmware updates available for your label maker and install them if necessary. Firmware updates can often fix software-related issues.
7. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Brother customer support for further assistance. They might be able to provide additional troubleshooting steps or help you determine if the device needs repair or replacement.