Brother P-TOUCH-1000 user manual

To reset your Brother P-touch 1000 label maker, you can follow these steps:
1. Ensure the label maker is turned off.
. Hold down the "Power" button and the "Print" button simultaneously.
3. While holding these two buttons, turn on the label maker by pressing the "Power" button.
4. Continue to hold the "Power" and "Print" buttons for a couple more seconds until the label maker prints a test label that says "Reset."
5. Once the test label is printed, release the "Power" and "Print" buttons.
6. Your P-touch 1000 label maker should now be reset to its default settings.
Please note that performing a reset will delete any saved settings or label formats you had previously stored on the device.

Printing two lines on a Brother P-Touch label maker involves several steps. Here' how to do it:
1. Turn on your Brother P-Touch label maker.
. Press the key labeled "Size" repeatedly until the screen displays the size you want to use for your two-line text.
3. Now press the "Caps" or "Shift" key and start typing your first line of text. Once you finish the first line, press the "Enter" key to go to the next line.
4. Type your second line of text and then press the "Ok" or "Enter" button.
5. You can preview the lines of text on your screen. If you are happy with them, press the "Print" button to print the label.
6. If you have any mistakes or want to edit, use the "Backspace" or "Delete" buttons to edit and then press "Print" again.
Remember, you can only print two lines on a Brother P-Touch label maker if the tape width is at least 3.5mm. Otherwise, it won't fit.

To change the font size on a Brother P-Touch 1000, follow these steps:
1. Ensure that the label maker is turned on.
. Press and hold the "Function" button (Fn) on the top left corner of the device.
3. While holding the "Fn" button, press the left or right arrow keys to scroll through the available font sizes. The available sizes are small, medium, and large.
4. Stop at the desired font size and release the "Fn" button. The chosen font size will be displayed on the screen.
5. Start typing or creating your label, and the text will appear in the selected font size.
Note: The font size can be changed for each individual label.

There could be several reasons why your Brother P-touch label maker is not working. Here are some troubleshooting steps you can try:
1. Check the power source: Ensure that the label maker is properly connected to a power source or that the batteries have enough charge.
2. Check the tape cassette: Make sure that the tape cassette is inserted correctly and that it is compatible with your label maker model.
3. Clean the print head: Over time, debris or adhesive residue may build up on the print head, causing issues with print quality. Use a soft, lint-free cloth or a label cleaner to gently clean the print head.
4. Check the settings: Make sure that the label maker is set to the correct language, font size, and other settings that might affect printing.
5. Reset the label maker: If the issue persists, try resetting the device. Refer to the user manual or the manufacturer's website for instructions specific to your model.
6. Update the firmware: Check if there are any firmware updates available for your label maker and install them if necessary. Firmware updates can often fix software-related issues.
7. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Brother customer support for further assistance. They might be able to provide additional troubleshooting steps or help you determine if the device needs repair or replacement.