Brother MFC-L2713DW user manual

To connect your Brother MFC-L2713DW printer to your computer, follow these steps:
1. Make sure your printer is powered on and near your computer.
2. Connect your printer to your computer using a USB cable. Most printers include a USB port for this purpose. Plug one end of the USB cable into the printer and the other end into an available USB port on your computer.
3. Wait for your computer to detect the printer. It should automatically install the necessary drivers. If your computer prompts you to install any drivers or software, follow the on-screen instructions to complete the installation.
4. Once the installation is complete, you should be able to print directly from your computer to the Brother MFC-L2713DW printer.
If you prefer a wireless connection, follow these additional steps:
1. Make sure your printer is connected to the same Wi-Fi network as your computer. You can check this by navigating to the network settings on the printer's display panel.
2. On your computer, open the Control Panel and go to "Devices and Printers" or "Printers and Scanners" (depending on your operating system).
3. Click on "Add a printer" or "Add a device" to begin the printer setup process.
4. Your computer will search for available printers on the network. Select your Brother MFC-L2713DW printer from the list of available devices.
5. Follow the on-screen instructions to complete the installation. This might include entering your Wi-Fi network password or selecting the desired printer settings.
6. Once the installation is complete, your Brother MFC-L2713DW printer will be connected to your computer wirelessly, allowing you to print without the need for a physical USB connection.

To reset your Brother MFC-L2713DW printer, you can follow these steps:
1. Make sure your printer is turned on.
. Open the front cover and leave it open.
3. Press and hold the "Go" button on your printer's control panel.
4. While keeping the "Go" button pressed, close the front cover.
5. Release the "Go" button when all the LED indicators on the control panel light up.
6. Press the "Cancel" button twice.
7. All the LED indicators will turn off, and the printer will reset.
The process of resetting may take a few seconds, and your printer will restart. After the reset, your printer should be restored to its factory default settings.