Brother MFC-7360N user manual

No, the Brother MFC-7360N printer is not wireless. It requires a wired connection to your computer or network.

Unfortunately, resetting a Brother MFC-7360N printer doesn't involve just one button. It is a slightly more complex process. Here are the instructions to do so:
1. Make sure the printer is turned off. You can do this by pressing the switch on the right side of the printer.
2. Open the front cover of the printer (the cover where you would replace the toner).
3. While the cover is open, hold down the "Clear/Back" button on the control panel, then turn the printer back on while still holding the "Clear/Back" button.
4. On the display, you will see a message that says "Replace Drum?".
Do not choose yes or no.
5. Press the “Start” button.
6. After that, press the "Up" arrow 12 times.
7. Now the printer will briefly display a message "Accepted".
8. Close the front cover and the printer should be reset.
Please keep in mind, however, that the above steps might not help if your printer has other hardware issues or errors.
Beforehand, you should remember that resetting the drum counter on a Brother printer should only be done if you've just replaced the drum unit. If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

To scan a document on your Brother MFC-7360N, follow the steps below:
1. Place the document you want to scan on the scanner glass or in the Automatic Document Feeder (ADF).
2. Make sure your Brother MFC-7360N is connected to your computer either via a USB cable or over the network.
3. On your computer, launch the Brother ControlCenter software. If you don't have it installed, you can download it from the Brother website and install it before proceeding.
4. Once the ControlCenter software is open, you should see a list of options. Click on the "Scan" option.
5. A new window will open up, providing you with various scan options. Choose the desired scan type (e.g., Image, OCR, E-mail, or File) and select the scan settings you prefer.
6. Verify that the correct Brother MFC-7360N is selected if you have multiple devices connected.
7. Click the "Scan" button to start the scanning process.
8. After the scanning is complete, you can choose to save the scanned document to a particular location on your computer, send it as an email attachment, or perform other actions depending on the selected scan type.
Once you have finished with the scanned document, you can proceed to edit, save, or share it as needed.